Skip to main content
Global Trade Content (GTC)
Search
Search ONESOURCE Global Trade Support Help and Support.

This article applies to:

  • Product: ONESOURCE Global Trade
  • Sub-Product: Global trade content

FEO Old x New Classification 10 - 16 (English)

Current Numbers
Descriptions
New Numbers
Descriptions
10.2.22.2.3.b
(b) Programs designed to detect abnormalities in the magnetic or underwater electric field on vehicles, vessels, aircraft, satellites or other spacecraft for space development
10.2-22.2.3.b
(b) Programs designed to detect abnormalities in the magnetic or underwater electric field on vehicles, vessels, aircraft, satellites or other spacecraft for space development
10.2.22.2.3.d
(d) Programs used for air traffic control that are capable of accepting target data from five or more primary radars.
10.2-22.2.3.d
(d) Programs used for air traffic control that are capable of accepting target data from five or more primary radars.
10.1.22.1.5
(v) Programs designed for the design or manufacture of items that fall under Article 9, item (ix) through item (x)-2 or item (xiii) (excluding those falling under the preceding item)
10.1-22.1.5
(v) Programs designed for the design or manufacture of items that fall under Article 9, item (ix) through item (x)-2 or item (xiii) (excluding those falling under the preceding item)
10.2.22.2.1
(i) Programs designed for the use of items that fall under Article 9, item (iv) or Article 13 or Article 14, item (viii).
10.2-22.2.1
(i) Programs designed for the use of items that fall under Article 9, item (iv) or Article 13 or Article 14, item (viii).
10.1.22
As Follows :
10.1-22
As Follows :
10.2.22
As Follows :
10.2-22
As Follows :
10.3.22
As Follows :
10.3-22
As Follows :
10.4.22
As Follows :
10.4-22
As Follows :
10.6.22
As Follows :
10.6-22
As Follows :
10.7.22
As Follows :
10.7-22
As Follows :
10.1.22.1.2
(ii) Technology required (excluding programs) for manufacturing of items that fall under Article 9, item (i), (a), 2. or 6. or (b), 3., item (iii), (a), (b) or (e), item (iv), item (v), (a), item (viii), (a) , 1., i. or 2., i. or 3., item (ix), (c) or (d), item (xi), (a), (b), (l) or (m), item (xi)-2, (a), or item (xiii), (d), (h) or (k).
10.1-22.1.2
(ii) Technology required (excluding programs) for manufacturing of items that fall under Article 9, item (i), (a), 2. or 6. or (b), 3., item (iii), (a), (b) or (e), item (iv), item (v), (a), item (viii), (a) , 1., i. or 2., i. or 3., item (ix), (c) or (d), item (xi), (a), (b), (l) or (m), item (xi)-2, (a), or item (xiii), (d), (h) or (k).
10.2.22.2.3.a
(a) Programs designed for calibration devices for magnetometers, underwater electric field sensors, or magnetic field gradient meters that are designed to be mounted on vehicles, ships, aircraft, artificial satellites, and other flying objects for space development.
10.2-22.2.3.a
(a) Programs designed for calibration devices for magnetometers, underwater electric field sensors, or magnetic field gradient meters that are designed to be mounted on vehicles, ships, aircraft, artificial satellites, and other flying objects for space development.
10.3.22.3.1
(i) Technology required (excluding programs) for manufacturing of the optical coatings having a diameter or major axis length of 500 mm or more and a loss due to absorption and scattering of less than 0.005, the uniformity of the thickness of the optical coating is 99.5% or more.
10.3-22.3.1
(i) Technology required (excluding programs) for manufacturing of the optical coatings having a diameter or major axis length of 500 mm or more and a loss due to absorption and scattering of less than 0.005, the uniformity of the thickness of the optical coating is 99.5% or more.
10.3.22.3.2
(ii) Technology related (excluding programs) to turning using a single point diamond tools to finish a curved surface with an area of more than 0.5 square meters so that the root mean square of surface accuracy is less than 10 nanometers.
10.3-22.3.2
(ii) Technology related (excluding programs) to turning using a single point diamond tools to finish a curved surface with an area of more than 0.5 square meters so that the root mean square of surface accuracy is less than 10 nanometers.
10.5
(v) Deleted
10.5
(v) Deleted
10.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in row 10 (ii) or (iv) to (xi) of appended table 1 of the Export Trade Control Order (excluding those listed in the middle columns of rows 2 and 15)
10.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in row 10 (ii) or (iv) to (xi) of appended table 1 of the Export Trade Control Order (excluding those listed in the middle columns of rows 2 and 15)
10.2.22.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.2-22.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.2.22.2.3
(iii) Programs that fall under any of the following
10.2-22.2.3
(iii) Programs that fall under any of the following
10.2.22.2.3.c
(c) Programs designed to compensate for the impact of movement on gravimeters or gravity gradiometer
10.2-22.2.3.c
(c) Programs designed to compensate for the impact of movement on gravimeters or gravity gradiometer
10.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the manufacturing of optical components (excluding those listed in (i) above)
10.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the manufacturing of optical components (excluding those listed in (i) above)
10.3.22.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.3-22.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacturing or use of test equipment for laser oscillators (excluding those listed in (i) above)
10.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacturing or use of test equipment for laser oscillators (excluding those listed in (i) above)
10.4.22.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (iv) of the appended table Foreign Exchange Order shall be technology (excluding programs) necessary for the design, manufacture or use of test equipment for extra high output laser oscillators.
10.4-22.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (iv) of the appended table Foreign Exchange Order shall be technology (excluding programs) necessary for the design, manufacture or use of test equipment for extra high output laser oscillators.
10.6
(vi) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of radomes (excluding those listed in the middle column of row 4)
10.6
(vi) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of radomes (excluding those listed in the middle column of row 4)
10.6.22.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (vi) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.6-22.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (vi) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.6.22.5.1
(i) Programs for manufacturing radomes that fall under following (a) and (b)
10.6-22.5.1
(i) Programs for manufacturing radomes that fall under following (a) and (b)
10.6.22.5.1.b
(b) Radomes that produce antenna patterns with the output ratio of main beam peak value to average side lobes exceeding 40 decibels
10.6-22.5.1.b
(b) Radomes that produce antenna patterns with the output ratio of main beam peak value to average side lobes exceeding 40 decibels
10.7
(vii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of equipment used in the testing of resistance of materials against laser beam or targets used therein
10.7
(vii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of equipment used in the testing of resistance of materials against laser beam or targets used therein
10.7.22.6
(6) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (vii) of the appended table of the Foreign Exchange Order shall be technology necessary for the design, manufacture or use of devices to perform tests of the durability of substances against laser beams output by extra-high-output laser oscillators or the targets used for the test.
10.7-22.6
(6) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (vii) of the appended table of the Foreign Exchange Order shall be technology necessary for the design, manufacture or use of devices to perform tests of the durability of substances against laser beams output by extra-high-output laser oscillators or the targets used for the test.
10.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 10 of appended table 1 of the Export Trade Control Order
10.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 10 of appended table 1 of the Export Trade Control Order
10.1.22.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.1-22.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 10 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
10.6.22.5.1.a
(a) Designed to protect an electronically scanned array antenna
10.6-22.5.1.a
(a) Designed to protect an electronically scanned array antenna
10.1.22.1.4
(iv) Programs designed for designing or manufacturing of program that falls under Article 9, item (ix)(c) or (d) or item (xiii) (d), (c) or (l) or technology required (excluding programs) for designing of that program.
10.1-22.1.4
(iv) Programs designed for designing or manufacturing of program that falls under Article 9, item (ix)(c) or (d) or item (xiii) (d), (c) or (l) or technology required (excluding programs) for designing of that program.
10.1.22.1.6
(vi) Technology required (excluding programs) for the designing of the programs of the previous item.
10.1-22.1.6
(vi) Technology required (excluding programs) for the designing of the programs of the previous item.
10.2.22.2.2
(ii) Technology required (excluding programs) for the designing of the programs of the previous item.
10.2-22.2.2
(ii) Technology required (excluding programs) for the designing of the programs of the previous item.
10.2.22.2.4
(iv) Technology required (excluding programs) for the designing of the programs of the previous item.
10.2-22.2.4
(iv) Technology required (excluding programs) for the designing of the programs of the previous item.
10.6.22.5.2
(ii) Technology required (excluding programs) for the designing of the programs of the previous item.
10.6-22.5.2
(ii) Technology required (excluding programs) for the designing of the programs of the previous item.
10.1.22.1.3
(iii) Technology required (excluding programs) for manufacturing of items that fall under Article 9 (excluding those falling under the previous item).
10.1-22.1.3
(iii) Technology required (excluding programs) for manufacturing of items that fall under Article 9 (excluding those falling under the previous item).
10.1.22.1.1
(i) Technology required (excluding programs) for the design of items that fall under Article 9
10.1-22.1.1
(i) Technology required (excluding programs) for the design of items that fall under Article 9
10
Sensors
10
Sensors
10.1.22.1.7
(vii) Programs designed or modified for cameras incorporating focal plane arrays falling under Article 9, item (iii), (d), 1. ii. or (e), 2., and designed or modified to remove the frame rate restriction of the camera and allow the camera to have its maximum frame rate exceed 9 hertz.
10.1-22.1.7
(vii) Programs designed or modified for cameras incorporating focal plane arrays falling under Article 9, item (iii), (d), 1. ii. or (e), 2., and designed or modified to remove the frame rate restriction of the camera and allow the camera to have its maximum frame rate exceed 9 hertz.
10.2.22.2.3.e
(e) Programs or source code designed to achieve real time processing of data pertaining to magnetic or electric fields by utilizing those falling under Article 9, item (xi)-2
10.2-22.2.3.e
(e) Programs or source code designed to achieve real time processing of data pertaining to magnetic or electric fields by utilizing those falling under Article 9, item (xi)-2
10.3.22.3.3
(iii) Programs designed to maintain the angle of the reflector system consisting of multiple mirrors for one meter or more in diameter or major axis length and phase
10.3-22.3.3
(iii) Programs designed to maintain the angle of the reflector system consisting of multiple mirrors for one meter or more in diameter or major axis length and phase
11.3
(iii) Deleted
11.3
(iii) Deleted
11.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 11 of appended table 1 of the Export Trade Control Order
11.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 11 of appended table 1 of the Export Trade Control Order
11.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in rows 11 (i) to (iv)-2 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 15)
11.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in rows 11 (i) to (iv)-2 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 15)
11.1.23.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 11 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
11.1-23.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 11 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
11.1.23.1.2
(ii) Programs designed for the design or manufacture of items that fall under Article 10
11.1-23.1.2
(ii) Programs designed for the design or manufacture of items that fall under Article 10
11.2.23.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 11 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
11.2-23.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 11 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
11.4.23.3.4
(iv) The technology (excluding programs) pertaining to devices for helicopters that falls under any of the following or a CAD programs designed for items that fall under (a) or (b)
11.4-23.3.4
(iv) The technology (excluding programs) pertaining to devices for helicopters that falls under any of the following or a CAD programs designed for items that fall under (a) or (b)
11.4.23.3.4.a
(a) B-axis fly-by-wire systems or fly-by-light systems, the following features of integrating two or more things
11.4-23.3.4.a
(a) B-axis fly-by-wire systems or fly-by-light systems, the following features of integrating two or more things
11.4.23.3.4.a.1
1. Collective control function
11.4-23.3.4.a.1
1. Collective control function
11.4.23.3.4.a.2
2. Cyclic control function
11.4-23.3.4.a.2
2. Cyclic control function
11.4.23.3.4.a.3
3. Yaw control function
11.4-23.3.4.a.3
3. Yaw control function
11.4.23.3.4.b
(b) Devices that control counter torque or direction and by a means of a circulation control method
11.4-23.3.4.b
(b) Devices that control counter torque or direction and by a means of a circulation control method
11.4.23.3.1.b
(b) Equipment to integrate propulsion control and flight control
11.4-23.3.1.b
(b) Equipment to integrate propulsion control and flight control
11.4.23.3.1.c
(c) Fly-by-wire systems or fly-by-light system
11.4-23.3.1.c
(c) Fly-by-wire systems or fly-by-light system
11.4.23.3.1.d
(d) Active flight controllers having a fault tolerance function or a self-reconfiguring function
11.4-23.3.1.d
(d) Active flight controllers having a fault tolerance function or a self-reconfiguring function
11.4.23.3.1.f
(f) Three-dimensional displays
11.4-23.3.1.f
(f) Three-dimensional displays
11.4.23.3.1.e
(e) Air data equipment that uses the static data of airframe surface as a reference
11.4-23.3.1.e
(e) Air data equipment that uses the static data of airframe surface as a reference
11.4.23.3.3
(iii) A technique according to the design of the active flight control system, which corresponds to one of the following
11.4-23.3.3
(iii) A technique according to the design of the active flight control system, which corresponds to one of the following
11.4.23.3.3.a
(a) The technology which relates to the optical communication for ordering for the detection of operating state of the fuselage or the flight control systematic equipment of the aircraft, the transmission of the flight control data or the operation of the actuator (the program is excluded.) Being, those which are necessary for the design of the active flight control control equipment of the fly-by-light system
11.4-23.3.3.a
(a) The technology which relates to the optical communication for ordering for the detection of operating state of the fuselage or the flight control systematic equipment of the aircraft, the transmission of the flight control data or the operation of the actuator (the program is excluded.) Being, those which are necessary for the design of the active flight control control equipment of the fly-by-light system
11.4.23.3.3.c
(c) To mitigate the degree of active flight control equipment performance degradation and fault identify the malfunction of equipment, reconfiguration of force and moment controls for real time algorithm.
11.4-23.3.3.c
(c) To mitigate the degree of active flight control equipment performance degradation and fault identify the malfunction of equipment, reconfiguration of force and moment controls for real time algorithm.
11.4.23.3.3.b
(b) Real-time algorithms to analyze component sensor information to predict and preemptively mitigate impending degradation and failures of components within an active flight control system
11.4-23.3.3.b
(b) Real-time algorithms to analyze component sensor information to predict and preemptively mitigate impending degradation and failures of components within an active flight control system
11.1.23
As Follows :
11.1-23
As Follows :
11.2.23
As Follows :
11.2-23
As Follows :
11.4.23
As Follows :
11.4-23
As Follows :
11.4.23.3.3.d
(d) Technology that integrates the flight all the way to the digital flight control systems , navigation, and propulsion control into a digital flight traffic controller in order to optimize flight routes (Excluding programs)
11.4-23.3.3.d
(d) Technology that integrates the flight all the way to the digital flight control systems , navigation, and propulsion control into a digital flight traffic controller in order to optimize flight routes (Excluding programs)
11.2.23.2.1
(i) Programs (limited to source code) for the use of attitude bearing reference systems (excluding gimbal systems), inertial navigation systems, and other inertial systems (limited to related to operation or maintenance (inspection)) or technology required (excluding programs)for the design of those programs.
11.2-23.2.1
(i) Programs (limited to source code) for the use of attitude bearing reference systems (excluding gimbal systems), inertial navigation systems, and other inertial systems (limited to related to operation or maintenance (inspection)) or technology required (excluding programs)for the design of those programs.
11.2.23.2.2
(ii) Technology required (excluding programs) for the use of items that fall under any of Article 10, items (i) to (iv) (limited to those pertaining to repairs or overhauls).
11.2-23.2.2
(ii) Technology required (excluding programs) for the use of items that fall under any of Article 10, items (i) to (iv) (limited to those pertaining to repairs or overhauls).
11.1.23.1.1
(i) Technology required (excluding programs) for the designing or manufacturing of items that fall under Article 10.
11.1-23.1.1
(i) Technology required (excluding programs) for the designing or manufacturing of items that fall under Article 10.
11.4.23.3.5
(v) Technology required (excluding programs) for the designing of the programs of the previous item.
11.4-23.3.5
(v) Technology required (excluding programs) for the designing of the programs of the previous item.
11.4.23.3.4.c
(c) Rotor blades using variable shape blades to control each blade individually.
11.4-23.3.4.c
(c) Rotor blades using variable shape blades to control each blade individually.
11.4.23.3.1.a
(a) Digital flight management systems for total control of flight.
11.4-23.3.1.a
(a) Digital flight management systems for total control of flight.
11.4.23.3.3.f
(f) Technology required (excluding programs) for designing programs.
11.4-23.3.3.f
(f) Technology required (excluding programs) for designing programs.
11.4.23.3.1
(i) Programs for those that fall under any of the following (limited to those with source code) and that use technology (excluding programs) pertaining to the design of those that fall under any of items 2(a) to (d) or item 3 (a) to (d), (g) or (h).
11.4-23.3.1
(i) Programs for those that fall under any of the following (limited to those with source code) and that use technology (excluding programs) pertaining to the design of those that fall under any of items 2(a) to (d) or item 3 (a) to (d), (g) or (h).
11.4.23.3.3.e
(e) CAD programs designed for active flight controllers using technology falling under any of (a) to (d), (g) or (h)
11.4-23.3.3.e
(e) CAD programs designed for active flight controllers using technology falling under any of (a) to (d), (g) or (h)
11.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of avionics equipment (excluding those listed in the middle column of row 4)
11.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of avionics equipment (excluding those listed in the middle column of row 4)
11.4.23.3
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 11 (iv) of the appended table of the Foreign Exchange Order shall fall under any of the following.
11.4-23.3
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 11 (iv) of the appended table of the Foreign Exchange Order shall fall under any of the following.
11.1.23.1.3
(iii) Technology required (excluding programs) for the designing of the programs of the previous item.
11.1-23.1.3
(iii) Technology required (excluding programs) for the designing of the programs of the previous item.
11
Navigation Systems
11
Navigation Systems
11.2.23.2.3
(iii) Technology required (excluding programs) pertaining to the design of the programs that fall under any of Article 27, paragraphs (3) to (5).
11.2-23.2.3
(iii) Technology required (excluding programs) pertaining to the design of the programs that fall under any of Article 27, paragraphs (3) to (5).
11.4.23.3.2.a
(a) Air data equipment that uses static data on the airframe surface as a reference
11.4-23.3.2.a
(a) Air data equipment that uses static data on the airframe surface as a reference
11.4.23.3.2.b
(b) Three-dimensional display for aircraft
11.4-23.3.2.b
(b) Three-dimensional display for aircraft
11.4.23.3.2.c
(c) Electric actuators designed for flight control
11.4-23.3.2.c
(c) Electric actuators designed for flight control
11.4.23.3.2.d
(d) Flight control optical sensor array designed for conducting active flight control
11.4-23.3.2.d
(d) Flight control optical sensor array designed for conducting active flight control
11.4.23.3.2.e
(e) Among data-based referenced navigation systems designed to be capable of being used in underwater navigation, those using a sonar or gravity database providing a positioning accuracy of 0.4 nautical miles or less
11.4-23.3.2.e
(e) Among data-based referenced navigation systems designed to be capable of being used in underwater navigation, those using a sonar or gravity database providing a positioning accuracy of 0.4 nautical miles or less
11.2.23.2.4
(iv) Programs designed to decrypt the ranging code of the satellite navigation system (except for civilian use).
11.2-23.2.4
(iv) Programs designed to decrypt the ranging code of the satellite navigation system (except for civilian use).
11.4.23.3.2
(ii) Technology (excluding programs) relating to the design or manufacture of items that fall under any of the following:
11.4-23.3.2
(ii) Technology (excluding programs) relating to the design or manufacture of items that fall under any of the following:
11.4.23.3.3.g.2
(ii) That apply to one or more of the following:
11.4-23.3.3.g.2
(ii) That apply to one or more of the following:
11.4.23.3.3.h.2
The probability that the control of the aircraft is lost, more than 10 parts per billion failure rate per flight
11.4-23.3.3.h.2
The probability that the control of the aircraft is lost, more than 10 parts per billion failure rate per flight
11.4.23.3.3.g.2.1
1. Within the scope of the flight envelope, What can compensate for the instability of the aircraft be corrected within 0.5 seconds after losing control deflection
11.4-23.3.3.g.2.1
1. Within the scope of the flight envelope, What can compensate for the instability of the aircraft be corrected within 0.5 seconds after losing control deflection
11.4.23.3.3.g
(g) Technology required (excluding programs) to achieve the functional requirements of fly-by-wire systems that falls under the following Items 1. and 2.
11.4-23.3.3.g
(g) Technology required (excluding programs) to achieve the functional requirements of fly-by-wire systems that falls under the following Items 1. and 2.
11.4.23.3.3.g.1
(i) Internal loop airframe control that requires a closed loop control frequency of 40 Hz or higher.
11.4-23.3.3.g.1
(i) Internal loop airframe control that requires a closed loop control frequency of 40 Hz or higher.
11.4.23.3.3.g.2.2
2. Combining control of two or more axes when correcting abnormal changes in the aircraft state
11.4-23.3.3.g.2.2
2. Combining control of two or more axes when correcting abnormal changes in the aircraft state
11.4.23.3.3.g.2.3
3. Equipment that performs the functions prescribed in (d) (excluding autopilot).
11.4-23.3.3.g.2.3
3. Equipment that performs the functions prescribed in (d) (excluding autopilot).
11.4.23.3.3.g.2.4
4. Technology for stable and controlled flight of an aircraft when the angle of attack is 18 degrees or more, the angle of skid is 15 degrees or more, the pitch rate is 15 degrees or more, the yaw rate is 15 degrees or more, or the roll rate is 90 degrees or more (excluding take-off and landing)
11.4-23.3.3.g.2.4
4. Technology for stable and controlled flight of an aircraft when the angle of attack is 18 degrees or more, the angle of skid is 15 degrees or more, the pitch rate is 15 degrees or more, the yaw rate is 15 degrees or more, or the roll rate is 90 degrees or more (excluding take-off and landing)
11.4.23.3.3.h
(h) Technology required (excluding programs) to achieve the functional requirements of fly-by-wire systems that falls under the following Items 1. and 2.
11.4-23.3.3.h
(h) Technology required (excluding programs) to achieve the functional requirements of fly-by-wire systems that falls under the following Items 1. and 2.
11.4.23.3.3.h.1
(1) Control of the aircraft shall not be lost even in the event of consecutive failures in either part of the fly-by-wire system.
11.4-23.3.3.h.1
(1) Control of the aircraft shall not be lost even in the event of consecutive failures in either part of the fly-by-wire system.
12.1.24
As Follows :
12.1-24
As Follows :
12.2.24
As Follows :
12.2-24
As Follows :
12.3.24
As Follows :
12.3-24
As Follows :
12.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 12 of appended table 1 of the Export Trade Control Order
12.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 12 of appended table 1 of the Export Trade Control Order
12.1.24.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 12 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
12.1-24.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 12 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
12.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 12 of appended table 1 of the Export Trade Control Order
12.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 12 of appended table 1 of the Export Trade Control Order
12.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of propellers (excluding those listed in (i) and (ii) above and in the middle column of row 15)
12.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of propellers (excluding those listed in (i) and (ii) above and in the middle column of row 15)
12.3.24.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 12 (iii) of the appended table of the Foreign Exchange Order shall be technology pertaining to the design or manufacture or use (limited to those pertaining to repairs or overhauls) of propellers designed for reducing underwater noise.
12.3-24.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 12 (iii) of the appended table of the Foreign Exchange Order shall be technology pertaining to the design or manufacture or use (limited to those pertaining to repairs or overhauls) of propellers designed for reducing underwater noise.
12.2.24.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in Paragraph 12 of the Foreign Exchange Ordinance (2) shall be based on a program designed to use cargo falling under Article 11 or Article 14 Item 9 or Item 10 or Article 11 Use of cargo that falls under item (1), item (1) -2, item (2), item (b) or item (c), item (8) or item (10), or item (14) item (9) or item (10). Technology (excluding programs).
12.2-24.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in Paragraph 12 of the Foreign Exchange Ordinance (2) shall be based on a program designed to use cargo falling under Article 11 or Article 14 Item 9 or Item 10 or Article 11 Use of cargo that falls under item (1), item (1) -2, item (2), item (b) or item (c), item (8) or item (10), or item (14) item (9) or item (10). Technology (excluding programs).
12.1.24.1.2
(ii) Technology required for designing or manufacturing of items that fall under Articles 11 (excluding those falling under the previous item)
12.1-24.1.2
(ii) Technology required for designing or manufacturing of items that fall under Articles 11 (excluding those falling under the previous item)
12.1.24.1.1
(i) Technology required for designing or manufacturing of items that fall under Articles 11 (1) -2, (4)(b), (6), (8) or (10)
12.1-24.1.1
(i) Technology required for designing or manufacturing of items that fall under Articles 11 (1) -2, (4)(b), (6), (8) or (10)
12
Marine
12
Marine
12.1.24.1.3.a.2
(2) Those where pressure of the cushion exceeds 3,830 Pascal
12.1-24.1.3.a.2
(2) Those where pressure of the cushion exceeds 3,830 Pascal
12.1.24.1.3
(iii) Ships which are designed to reduce the wave making resistance by reducing air-cushion boat or hydrofoil water area that fall under any of the following kind of design or manufacturing technology (except for the program.
12.1-24.1.3
(iii) Ships which are designed to reduce the wave making resistance by reducing air-cushion boat or hydrofoil water area that fall under any of the following kind of design or manufacturing technology (except for the program.
12.1.24.1.3.d.1
(1) Designed as full drainage amount exceeds 500 tons and the maximum value of the full loaded condition speed exceeds 35 knots when the significant wave height is 3.25 m or more
12.1-24.1.3.d.1
(1) Designed as full drainage amount exceeds 500 tons and the maximum value of the full loaded condition speed exceeds 35 knots when the significant wave height is 3.25 m or more
12.1.24.1.3.d.2
(2) Designed as the full drainage volume exceeds 1,500 tons and the maximum value of the full loaded speed exceeds 25 knots when the significant wave height is 4 meters or more
12.1-24.1.3.d.2
(2) Designed as the full drainage volume exceeds 1,500 tons and the maximum value of the full loaded speed exceeds 25 knots when the significant wave height is 4 meters or more
12.1.24.1.3.a.3
(3) Those with less than 70% ratio of light load discharge volume to full drainage volume
12.1-24.1.3.a.3
(3) Those with less than 70% ratio of light load discharge volume to full drainage volume
12.1.24.1.3.d
(d) A ship designed to reduce the wave resistance by decreasing the area of the water line and falling under any of the following
12.1-24.1.3.d
(d) A ship designed to reduce the wave resistance by decreasing the area of the water line and falling under any of the following
12.1.24.1.3.a
(a) A skirt type air cushion ship (limited to one with a flexible skirt attached to the entire perimeter of the hull) and falling under all of the following
12.1-24.1.3.a
(a) A skirt type air cushion ship (limited to one with a flexible skirt attached to the entire perimeter of the hull) and falling under all of the following
12.1.24.1.3.a.1
(1) Designed so that the maximum speed in full loaded condition exceeds 30 knots, when the effective wave height is 1.25 meters or more
12.1-24.1.3.a.1
(1) Designed so that the maximum speed in full loaded condition exceeds 30 knots, when the effective wave height is 1.25 meters or more
12.1.24.1.3.b
(b) A side-wall type air cushion ship with a maximum speed in full load condition exceeding 40 knots, when the meaningful wave height is 3.25 meters or more
12.1-24.1.3.b
(b) A side-wall type air cushion ship with a maximum speed in full load condition exceeding 40 knots, when the meaningful wave height is 3.25 meters or more
12.1.24.1.3.c
(c) Hydrofoil vessels designed so that the maximum speed in a fully loaded state is 40 knots or more when the significant wave height is 3.255 meters or more, Having a device that automatically controls the hydrofoil by measuring the data.
12.1-24.1.3.c
(c) Hydrofoil vessels designed so that the maximum speed in a fully loaded state is 40 knots or more when the significant wave height is 3.255 meters or more, Having a device that automatically controls the hydrofoil by measuring the data.
13.2.25.2.3.d
(d) Deleted
13.2-25.2.3.d
(d) Deleted
13.3.25.3.2.h
(h) Deleted
13.3-25.3.2.h
(h) Deleted
13.3.25.3.2.i
(i) Deleted
13.3-25.3.2.i
(i) Deleted
13.3.25.3.2.k
(k) Any technology corresponding to Article 27, paragraph (6), item (i) or (ii) (excluding program) cooling holes in parts of the gas turbine engine using the machining technology required for the drilling of those falling under any of the following
13.3-25.3.2.k
(k) Any technology corresponding to Article 27, paragraph (6), item (i) or (ii) (excluding program) cooling holes in parts of the gas turbine engine using the machining technology required for the drilling of those falling under any of the following
13.3.25.3.2.k.1
(i) The minimum cross-sectional area is less than 0.45 mm^2, out of which the aspect ratio exceeds 4.52, the hole drilling angle below 25 degrees.
13.3-25.3.2.k.1
(i) The minimum cross-sectional area is less than 0.45 mm^2, out of which the aspect ratio exceeds 4.52, the hole drilling angle below 25 degrees.
13.3.25.3.2.k.2
(ii) The minimum cross-sectional area is less than 0.12 mm^2, out of which the aspect ratio exceeds 5.65, the hole drilling angle exceeds 25 degrees.
13.3-25.3.2.k.2
(ii) The minimum cross-sectional area is less than 0.12 mm^2, out of which the aspect ratio exceeds 5.65, the hole drilling angle exceeds 25 degrees.
13.1.25.1.1
As Follows :
13.1-25.1.1
As Follows :
13.1.25
As Follows :
13.1-25
As Follows :
13.2.25
As Follows :
13.2-25
As Follows :
13.3.25
As Follows :
13.3-25
As Follows :
13.4.25
As Follows :
13.4-25
As Follows :
13.5.25
As Follows :
13.5-25
As Follows :
13.3.25.3.2.j
(j) Fan blades that fall under the following (1) and (2)
13.3-25.3.2.j
(j) Fan blades that fall under the following (1) and (2)
13.2.25.2.1
(i) Technology (excluding programs) that fall under item 3 of paragraph 3 Which is used in the full authority digital engine control system for cargo that falls under Article 12.
13.2-25.2.1
(i) Technology (excluding programs) that fall under item 3 of paragraph 3 Which is used in the full authority digital engine control system for cargo that falls under Article 12.
13.3.25.3.2.a
(a) Combustors having any of the following:
13.3-25.3.2.a
(a) Combustors having any of the following:
13.3.25.3.2.c
(c)Uncooled turbine blades, vanes or tip-shrouds, designed to operate at a gas path temperature of 1 100 °C or more.
13.3-25.3.2.c
(c)Uncooled turbine blades, vanes or tip-shrouds, designed to operate at a gas path temperature of 1 100 °C or more.
13.3.25.3.2.d
(d) Cooled turbine blades, vanes or tip-shrouds designed to operate at a gas path temperature of 1 1 420 °C or higher (excluding those falling under Article 27, paragraph 6, item (i)).
13.3-25.3.2.d
(d) Cooled turbine blades, vanes or tip-shrouds designed to operate at a gas path temperature of 1 1 420 °C or higher (excluding those falling under Article 27, paragraph 6, item (i)).
13.4.25.4.3
(iii) Technology required (excluding programs) for designing or manufacturing power transmission equipment for helicopters or aircraft using tilt rotors or tilt wings.
13.4-25.4.3
(iii) Technology required (excluding programs) for designing or manufacturing power transmission equipment for helicopters or aircraft using tilt rotors or tilt wings.
13.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 13 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 15)
13.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 13 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 15)
13.1.25.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
13.1-25.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
13.1.25.1.2
(ii) Programs designed for the design or manufacture of items that fall under Article 12, item (xi), (b)
13.1-25.1.2
(ii) Programs designed for the design or manufacture of items that fall under Article 12, item (xi), (b)
13.1.25.1.4
(iv) Programs designed for the design or manufacture of items that fall under Article 12 (excluding those falling under item (ii))
13.1-25.1.4
(iv) Programs designed for the design or manufacture of items that fall under Article 12 (excluding those falling under item (ii))
13.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 13 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 4)
13.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 13 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 4)
13.2.25.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
13.2-25.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
13.2.25.2.3
(iii) Programs that fall under any of the following
13.2-25.2.3
(iii) Programs that fall under any of the following
13.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of gas turbine engines or parts thereof (excluding those listed in (i) and (ii) above and in the middle column of row 15)
13.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of gas turbine engines or parts thereof (excluding those listed in (i) and (ii) above and in the middle column of row 15)
13.3.25.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
13.3-25.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
13.3.25.3.1
(i) The technology (excluding programs) pertaining to use of gas turbine engines or components thereof that fall under any of Article 12, item (i), (b), item (iv) through item (x) or item (xi) through item (xix) (limited to those pertaining to repairs or overhauls)
13.3-25.3.1
(i) The technology (excluding programs) pertaining to use of gas turbine engines or components thereof that fall under any of Article 12, item (i), (b), item (iv) through item (x) or item (xi) through item (xix) (limited to those pertaining to repairs or overhauls)
13.3.25.3.2.b
(b) Article 4 No. 7 of the fiber substance falls to no. 12, paragraph 15 of the same article b in metal matrix composites reinforced by appropriate aluminium compounds or ceramic matrix composite materials relevant to article no. 12 was manufactured as a raw material
13.3-25.3.2.b
(b) Article 4 No. 7 of the fiber substance falls to no. 12, paragraph 15 of the same article b in metal matrix composites reinforced by appropriate aluminium compounds or ceramic matrix composite materials relevant to article no. 12 was manufactured as a raw material
13.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacturing of aircraft or parts thereof (excluding those listed in (i) above and in the middle column of row 1)
13.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacturing of aircraft or parts thereof (excluding those listed in (i) above and in the middle column of row 1)
13.4.25.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (iv) of the appended table of the Foreign Exchange Order shall fall under any of the following, or under programs for the design thereof.
13.4-25.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (iv) of the appended table of the Foreign Exchange Order shall fall under any of the following, or under programs for the design thereof.
13.5
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacturing of diesel engines or parts thereof (excluding those listed in the middle column of row 14)
13.5
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacturing of diesel engines or parts thereof (excluding those listed in the middle column of row 14)
13.5.25.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (v) of the appended table of the Foreign Exchange Order shall fall under any of the following or the programs for the design thereof.
13.5-25.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 13 (v) of the appended table of the Foreign Exchange Order shall fall under any of the following or the programs for the design thereof.
13.5.25.5.1
(i) The technology (excluding programs) pertaining to the design or manufacture of reciprocating diesel engines for vehicles that fall under all of the following (a) through (C )
13.5-25.5.1
(i) The technology (excluding programs) pertaining to the design or manufacture of reciprocating diesel engines for vehicles that fall under all of the following (a) through (C )
13.5.25.5.1.a
(a) Diesel engines with the engine volume of 1.2 cubic meters or less
13.5-25.5.1.a
(a) Diesel engines with the engine volume of 1.2 cubic meters or less
13.5.25.5.1.b
(b) Diesel engines with a gross shaft power exceeding 750 kilowatts
13.5-25.5.1.b
(b) Diesel engines with a gross shaft power exceeding 750 kilowatts
13.5.25.5.1.c
(c) Diesel engines for which the gross brake power expressed in kilowatts divided by the engine volume expressed in cubic meters exceeds 700
13.5-25.5.1.c
(c) Diesel engines for which the gross brake power expressed in kilowatts divided by the engine volume expressed in cubic meters exceeds 700
13.5.25.5.2.a.1
1. Cylinder liners
13.5-25.5.2.a.1
1. Cylinder liners
13.5.25.5.2.a.2
2. Pistons
13.5-25.5.2.a.2
2. Pistons
13.5.25.5.2.c
(c) Technology necessary for the manufacture of, among fuel injection devices designed so as to use any of the fuels the dynamic viscosity of which at 37.8 degrees centigrade is 0.5 centistokes or more and 2.5 centistokes or less, those that fall under the following 1. and 2.
13.5-25.5.2.c
(c) Technology necessary for the manufacture of, among fuel injection devices designed so as to use any of the fuels the dynamic viscosity of which at 37.8 degrees centigrade is 0.5 centistokes or more and 2.5 centistokes or less, those that fall under the following 1. and 2.
13.5.25.5.2.c.1
1. Fuel injection devices in which the injection amount exceeds 230 cubic millimeters per cylinder injection
13.5-25.5.2.c.1
1. Fuel injection devices in which the injection amount exceeds 230 cubic millimeters per cylinder injection
13.5.25.5.2.c.2
2. Fuel injection devices that are controlled electronically so that adjuster characteristics can be automatically switched in order to obtain the same torque characteristics in response to fuel characteristics
13.5-25.5.2.c.2
2. Fuel injection devices that are controlled electronically so that adjuster characteristics can be automatically switched in order to obtain the same torque characteristics in response to fuel characteristics
13.2.25.2.3.a
(a) A program for two-dimensional or three-dimensional viscous flow verified by wind tunnel test or flight test data, for modeling flow in the engine
13.2-25.2.3.a
(a) A program for two-dimensional or three-dimensional viscous flow verified by wind tunnel test or flight test data, for modeling flow in the engine
13.2.25.2.3.c
(c) A program to be used for cargo applicable to Article 12, item 11 (a) or (c), designed to control the growth of material of unidirectional solidification or material of single crystal
13.2-25.2.3.c
(c) A program to be used for cargo applicable to Article 12, item 11 (a) or (c), designed to control the growth of material of unidirectional solidification or material of single crystal
13.2.25.2.3.b
(b) A program for testing a gas turbine engine for an aircraft or an assembly or a part thereof, which corresponds to the following (1) and (2) (things for operating test equipment, Excluding items for securing or for receipt tests of manufacturing, repair or maintenance (meaning those making judgment as to whether the product is appropriately assembled or repaired).
13.2-25.2.3.b
(b) A program for testing a gas turbine engine for an aircraft or an assembly or a part thereof, which corresponds to the following (1) and (2) (things for operating test equipment, Excluding items for securing or for receipt tests of manufacturing, repair or maintenance (meaning those making judgment as to whether the product is appropriately assembled or repaired).
13.3.25.3.2.e
(e)Wings and disks joined using solid-state welding
13.3-25.3.2.e
(e)Wings and disks joined using solid-state welding
13.3.25.3.2.f
(f) Deleted
13.3-25.3.2.f
(f) Deleted
13.5.25.5.2.a.3
3. Cylinder head
13.5-25.5.2.a.3
3. Cylinder head
13.1.25.1.3
(iii) Technology required (excluding programs) for the designing of the programs of the previous item.
13.1-25.1.3
(iii) Technology required (excluding programs) for the designing of the programs of the previous item.
13.1.25.1.5
(v) Technology required (excluding programs) for the designing of the programs of the previous item.
13.1-25.1.5
(v) Technology required (excluding programs) for the designing of the programs of the previous item.
13.2.25.2.2
(ii) Technology required (excluding programs) for the designing of the programs of the previous item.
13.2-25.2.2
(ii) Technology required (excluding programs) for the designing of the programs of the previous item.
13.2.25.2.4
(iv) Technology required (excluding programs) for the designing of the programs of the previous item.
13.2-25.2.4
(iv) Technology required (excluding programs) for the designing of the programs of the previous item.
13.3.25.3.2
(ii) Technology required (excluding programs) for the designing or manufacturing of components of gas turbine engines that fall under any of the following or programs for design thereof
13.3-25.3.2
(ii) Technology required (excluding programs) for the designing or manufacturing of components of gas turbine engines that fall under any of the following or programs for design thereof
13.4.25.4.1
(i) Technology required (excluding programs) for designing or manufacturing models for wind tunnels that use sensors that do not affect the flow conditions and that can transmit data from the sensors to the data collection device.
13.4-25.4.1
(i) Technology required (excluding programs) for designing or manufacturing models for wind tunnels that use sensors that do not affect the flow conditions and that can transmit data from the sensors to the data collection device.
13.4.25.4.2
(ii) Technology required (excluding programs) for designing or manufacturing propeller blades or propfans made of composite materials that can absorb loads exceeding 2,000 kW at speeds exceeding Mach number 0.55.
13.4-25.4.2
(ii) Technology required (excluding programs) for designing or manufacturing propeller blades or propfans made of composite materials that can absorb loads exceeding 2,000 kW at speeds exceeding Mach number 0.55.
13.5.25.5.2
(ii) Technology required (excluding programs) for manufacturing of the components of high-output diesel engines (this shall mean diesel engines in which the rated rotational speed is 2,300 or more revolutions per minute (RPM) and in which the brake average effective pressure is 1.8 megapascals or more when the RPM is 2,300; hereinafter the same shall apply in this Article), that fall under any of the following:
13.5-25.5.2
(ii) Technology required (excluding programs) for manufacturing of the components of high-output diesel engines (this shall mean diesel engines in which the rated rotational speed is 2,300 or more revolutions per minute (RPM) and in which the brake average effective pressure is 1.8 megapascals or more when the RPM is 2,300; hereinafter the same shall apply in this Article), that fall under any of the following:
13.5.25.5.2.a
(a) Technology required for manufacturing of engines all components of which, from the following (1) to (3) are made of ceramics that fall under Article 4, item (xii) (Except for those parts, all parts other than those made of ceramic products).
13.5-25.5.2.a
(a) Technology required for manufacturing of engines all components of which, from the following (1) to (3) are made of ceramics that fall under Article 4, item (xii) (Except for those parts, all parts other than those made of ceramic products).
13.5.25.5.2.b
(b) Technology required for manufacturing of turbochargers with compressor of which falls under all of following (1) to (3):
13.5-25.5.2.b
(b) Technology required for manufacturing of turbochargers with compressor of which falls under all of following (1) to (3):
13.5.25.5.2.b.1
1.A pressure ratio of 4 or more per stage
13.5-25.5.2.b.1
1.A pressure ratio of 4 or more per stage
13.5.25.5.2.b.2
2. Flow rate of 30 kg or more and 130 kg or less per minute
13.5-25.5.2.b.2
2. Flow rate of 30 kg or more and 130 kg or less per minute
13.5.25.5.2.b.3
3. Variable flow area capability within the compressor or turbine parts.
13.5-25.5.2.b.3
3. Variable flow area capability within the compressor or turbine parts.
13.5.25.5.3
(iii) Technology required (excluding programs) for designing or manufacturing of high output diesel engines the wall surface temperature of which exceeds 450 degrees centigrade measured at the top dead center of the piston top ring and that use solid, gas phase or liquid lubricants on cylinder wall surfaces.
13.5-25.5.3
(iii) Technology required (excluding programs) for designing or manufacturing of high output diesel engines the wall surface temperature of which exceeds 450 degrees centigrade measured at the top dead center of the piston top ring and that use solid, gas phase or liquid lubricants on cylinder wall surfaces.
13.3.25.3.2.g
(g) Rotating parts designed for damage tolerance and using powder metallurgy materials (limited to those falling under Article 4, item (vii)(b)).
13.3-25.3.2.g
(g) Rotating parts designed for damage tolerance and using powder metallurgy materials (limited to those falling under Article 4, item (vii)(b)).
13
Propulsion Systems
13
Propulsion Systems
13.2.25.2.3.e
(e) Programs designed to be used in the items falling under Article 12, item (x)-2 (limited to those pertaining to the operation).
13.2-25.2.3.e
(e) Programs designed to be used in the items falling under Article 12, item (x)-2 (limited to those pertaining to the operation).
13.2.25.2.3.f
(f) Programs designed to design the internal cooling passages of aero gas turbine blades, vanes or tip shrouds
13.2-25.2.3.f
(f) Programs designed to design the internal cooling passages of aero gas turbine blades, vanes or tip shrouds
13.2.25.2.3.g
(g) Programs falling under the following 1. and 2.
13.2-25.2.3.g
(g) Programs falling under the following 1. and 2.
13.3.25.3.2.a.2
(ii) Non-metallic liner
13.3-25.3.2.a.2
(ii) Non-metallic liner
13.3.25.3.2.a.3
(iii) Non metallic shell
13.3-25.3.2.a.3
(iii) Non metallic shell
13.3.25.3.3.a
(a) The technology pertaining to the design of components for gas turbine engines, to furnish the components for gas turbine engines with the functions for regulating engine thrust or shaft power
13.3-25.3.3.a
(a) The technology pertaining to the design of components for gas turbine engines, to furnish the components for gas turbine engines with the functions for regulating engine thrust or shaft power
13.3.25.3.3.b
(b) The technology pertaining to the design or manufacture of components that control or diagnose engines which are used to regulate engine thrust or shaft power
13.3-25.3.3.b
(b) The technology pertaining to the design or manufacture of components that control or diagnose engines which are used to regulate engine thrust or shaft power
13.3.25.3.3.c
(c) The technology pertaining to the design of control law algorithms (including source codes) which are used to regulate engine thrust or shaft power
13.3-25.3.3.c
(c) The technology pertaining to the design of control law algorithms (including source codes) which are used to regulate engine thrust or shaft power
13.3.25.3.4
(iv) The technology (excluding programs) pertaining to the design or manufacture of equipment to enable the adjustment of flow path shapes, which has been designed to maintain engine stability for gas generator turbines, fan turbines, power turbines or propelling nozzles
13.3-25.3.4
(iv) The technology (excluding programs) pertaining to the design or manufacture of equipment to enable the adjustment of flow path shapes, which has been designed to maintain engine stability for gas generator turbines, fan turbines, power turbines or propelling nozzles
13.3.25.3.4.a
(a) The technology pertaining to the design for the components maintaining engine stability to fulfill its function
13.3-25.3.4.a
(a) The technology pertaining to the design for the components maintaining engine stability to fulfill its function
13.3.25.3.4.b
(b) The technology pertaining to the design or manufacture of components for equipment to enable adjustments of flow path shapes, that maintain engine stability
13.3-25.3.4.b
(b) The technology pertaining to the design or manufacture of components for equipment to enable adjustments of flow path shapes, that maintain engine stability
13.3.25.3.4.c
(c) The technology pertaining to the design of control law algorithms (including source codes) for the equipment to enable adjustments of flow path shapes, that maintain the stability of engines
13.3-25.3.4.c
(c) The technology pertaining to the design of control law algorithms (including source codes) for the equipment to enable adjustments of flow path shapes, that maintain the stability of engines
13.2.25.2.3.g.1
(1) Designed to predict the thermal state, aerodynamic state or combustion condition of air in an aircraft gas turbine engine.
13.2-25.2.3.g.1
(1) Designed to predict the thermal state, aerodynamic state or combustion condition of air in an aircraft gas turbine engine.
13.3.25.3.2.a.1
(i) It is a heat shielding liner, and the combustor outlet temperature exceeds 1,610 degrees.
13.3-25.3.2.a.1
(i) It is a heat shielding liner, and the combustor outlet temperature exceeds 1,610 degrees.
13.3.25.3.3
(iii) A part of a gas turbine engine which is a technology (excluding programs) relating to the design or production of a full authority digital engine control system of a gas turbine engine, which falls under any of the following or its design Program
13.3-25.3.3
(iii) A part of a gas turbine engine which is a technology (excluding programs) relating to the design or production of a full authority digital engine control system of a gas turbine engine, which falls under any of the following or its design Program
13.2.25.2.3.g.2
(2) A model that theoretically predicts the thermal, aerodynamic, or combustion state of air based on the performance data of an actual aircraft gas turbine engine.
13.2-25.2.3.g.2
(2) A model that theoretically predicts the thermal, aerodynamic, or combustion state of air based on the performance data of an actual aircraft gas turbine engine.
13.1.25.1.1.1
(i) Technology required (excluding programs) for designing of items that fall under any of Article 12, item (i)(b), item (iv) to item (xx).
13.1-25.1.1.1
(i) Technology required (excluding programs) for designing of items that fall under any of Article 12, item (i)(b), item (iv) to item (xx).
13.1.25.1.1.2
(ii) Technology required (excluding programs) for manufacturing products that fall under any of Article 12, item 1 (b), items 4 to 10 or items 11 to 20.
13.1-25.1.1.2
(ii) Technology required (excluding programs) for manufacturing products that fall under any of Article 12, item 1 (b), items 4 to 10 or items 11 to 20.
13.3.25.3.2.a.4
(iv) A liner with a cooling hole corresponding to the one in which the combustor outlet temperature exceeds 1,610 degrees.
13.3-25.3.2.a.4
(iv) A liner with a cooling hole corresponding to the one in which the combustor outlet temperature exceeds 1,610 degrees.
13.3.25.3.2.l.1
(i) shall not be applicable to Article 27 paragraph 6 (b) first item
13.3-25.3.2.l.1
(i) shall not be applicable to Article 27 paragraph 6 (b) first item
13.2.25.2.5
(v) A program designed or modified to use (limited to those related to operation) those that fall under Article 12, item 4 (e) or Article 12, item 4-3.
13.2-25.2.5
(v) A program designed or modified to use (limited to those related to operation) those that fall under Article 12, item 4 (e) or Article 12, item 4-3.
13.3.25.3.2.l
(l) Stators, vanes, blades, tip seals, tip shrouds, rotary blisks, rotary blings or splitter ducts that falls under all of the following:
13.3-25.3.2.l
(l) Stators, vanes, blades, tip seals, tip shrouds, rotary blisks, rotary blings or splitter ducts that falls under all of the following:
13.3.25.3.2.l.2
(ii) Designed for compressors or fans.
13.3-25.3.2.l.2
(ii) Designed for compressors or fans.
13.3.25.3.2.l.3
(iii) Manufactured using substances corresponding to Article 4, item 15 (e) and resins corresponding to Article 4, item 13 as raw materials.
13.3-25.3.2.l.3
(iii) Manufactured using substances corresponding to Article 4, item 15 (e) and resins corresponding to Article 4, item 13 as raw materials.
13.4.25.4.4
(iv) Technology required (excluding programs) for designing wing folding systems designed for fixed-wing aircraft powered by gas turbine engines.
13.4-25.4.4
(iv) Technology required (excluding programs) for designing wing folding systems designed for fixed-wing aircraft powered by gas turbine engines.
13.2.25.2.3.b.2.1
(i) Collection and processing of data in real time
13.2-25.2.3.b.2.1
(i) Collection and processing of data in real time
13.2.25.2.3.b.2.2
(ii) Feedback control of test object or test condition during test
13.2-25.2.3.b.2.2
(ii) Feedback control of test object or test condition during test
13.2.25.2.3.b.1
(i) Specially designed for testing that falls under any of the following:
13.2-25.2.3.b.1
(i) Specially designed for testing that falls under any of the following:
13.2.25.2.3.b.1.1
(i) Aircraft gas turbine engines or parts or components thereof, which use technology that falls under any of item (ii)(a) to (g) of the following paragraph, item (iii) or (iv) of the same paragraph, or item (i) of Article 27 paragraph (vi).
13.2-25.2.3.b.1.1
(i) Aircraft gas turbine engines or parts or components thereof, which use technology that falls under any of item (ii)(a) to (g) of the following paragraph, item (iii) or (iv) of the same paragraph, or item (i) of Article 27 paragraph (vi).
13.2.25.2.3.b.1.2
(ii) Multistage compressors providing bypass flow path or a core flow path, which are specially designed for aircraft gas turbine engines using technology that falls under any of item (ii)(a) to (g) or (j) of the following paragraph, or Article 27, paragraph (6), item (i).
13.2-25.2.3.b.1.2
(ii) Multistage compressors providing bypass flow path or a core flow path, which are specially designed for aircraft gas turbine engines using technology that falls under any of item (ii)(a) to (g) or (j) of the following paragraph, or Article 27, paragraph (6), item (i).
13.2.25.2.3.b.2
(ii) Specially designed to perform the following 1 and 2:
13.2-25.2.3.b.2
(ii) Specially designed to perform the following 1 and 2:
13.3.25.3.2.j.1
(1) Having one or more closed cavities consisting only of vacuum or gas, and the total volume of the closed cavities is 20% or more of the total volume of the fan blade
13.3-25.3.2.j.1
(1) Having one or more closed cavities consisting only of vacuum or gas, and the total volume of the closed cavities is 20% or more of the total volume of the fan blade
13.3.25.3.2.j.2
(2) Those having one or more closed cavities with a volume of 5 cubic centimeters or more
13.3-25.3.2.j.2
(2) Those having one or more closed cavities with a volume of 5 cubic centimeters or more
13.3.25.3.2.a.5
(5) Using pressure gain combustion
13.3-25.3.2.a.5
(5) Using pressure gain combustion
14.1.26
As Follows :
14.1-26
As Follows :
14.1
Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of goods listed in the middle column of row 14 of appended table 1 of the Export Trade Control Order
14.1
Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of goods listed in the middle column of row 14 of appended table 1 of the Export Trade Control Order
14.1.26.1
The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 14 of the appended table of the Foreign Exchange Order shall fall under any of the following.
14.1-26.1
The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 14 of the appended table of the Foreign Exchange Order shall fall under any of the following.
14.1.26.1.1
(i) Technology required (excluding programs) for designing, manufacturing or using items that fall under Article 13.
14.1-26.1.1
(i) Technology required (excluding programs) for designing, manufacturing or using items that fall under Article 13.
14.1.26.1.2
(ii) Programs designed for the design, manufacture or use of items that fall under Article 13 or technology required (excluding programs) for the design, manufacture or use of those programs
14.1-26.1.2
(ii) Programs designed for the design, manufacture or use of items that fall under Article 13 or technology required (excluding programs) for the design, manufacture or use of those programs
14
Other
14
Other
14.1.26.1.3
(iii) Technology that is specially designed so that a cargo can perform the functions of a cargo that falls under Article 13, Paragraph 8 only by using the technology.
14.1-26.1.3
(iii) Technology that is specially designed so that a cargo can perform the functions of a cargo that falls under Article 13, Paragraph 8 only by using the technology.
15.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 15 of appended table 1 of the Export Trade Control Order
15.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 15 of appended table 1 of the Export Trade Control Order
15.5.1
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of gyroscopes for celestial navigation, or devices that derive position or orientation by means of automatically tracking celestial bodies or satellites
15.5.1
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of gyroscopes for celestial navigation, or devices that derive position or orientation by means of automatically tracking celestial bodies or satellites
15.3.27.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (iii) of the appended table of the Foreign Exchange Order shall be programs that fall under any of the following or the technology necessary for the design of those programs
15.3-27.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (iii) of the appended table of the Foreign Exchange Order shall be programs that fall under any of the following or the technology necessary for the design of those programs
15.3.27.2.1
(i) Programs designed for carrying out acoustic beam molding for real time processing of sound data received by using towed hydrophone arrays
15.3-27.2.1
(i) Programs designed for carrying out acoustic beam molding for real time processing of sound data received by using towed hydrophone arrays
15.3.27.2.2
(ii) Source code for executing real time processing of sound data received by using towed hydrophone arrays
15.3-27.2.2
(ii) Source code for executing real time processing of sound data received by using towed hydrophone arrays
15.3.27.2.3
(iii) Programs designed for carrying out acoustic beam molding for real time processing of sound data received by using ocean bottom or harbor/port cable systems
15.3-27.2.3
(iii) Programs designed for carrying out acoustic beam molding for real time processing of sound data received by using ocean bottom or harbor/port cable systems
15.4.27.3.2.c
(c) Data from data-based referenced navigation systems
15.4-27.3.2.c
(c) Data from data-based referenced navigation systems
15.6.27.6.2
(ii) Program necessary for the design of technology that fall under the previous item.
15.6-27.6.2
(ii) Program necessary for the design of technology that fall under the previous item.
15.1.27.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
15.1-27.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
15.4.27.3.1
(i) Programs designed so that these systems can fall under Article 10, item (iii) due to their using inertial navigation systems or other inertial systems
15.4-27.3.1
(i) Programs designed so that these systems can fall under Article 10, item (iii) due to their using inertial navigation systems or other inertial systems
15.4.27.3.2
(ii) Programs that enable devices to fall under Article 10, item (iii) due to their using inertial navigation systems or other inertial systems and continuously integrating heading data and navigation data that falls under any of the following (limited to those with source code)
15.4-27.3.2
(ii) Programs that enable devices to fall under Article 10, item (iii) due to their using inertial navigation systems or other inertial systems and continuously integrating heading data and navigation data that falls under any of the following (limited to those with source code)
15.6.27.6.1
(i) Technology(excluding programs) required to design or manufacture of gas turbine engine parts and accessories those falling under any of the following :
15.6-27.6.1
(i) Technology(excluding programs) required to design or manufacture of gas turbine engine parts and accessories those falling under any of the following :
15.1.27
As Follows :
15.1-27
As Follows :
15.3.27
As Follows :
15.3-27
As Follows :
15.4.27
As Follows :
15.4-27
As Follows :
15.5.1.27
As Follows :
15.5.1-27
As Follows :
15.5.2.27
As Follows :
15.5.2-27
As Follows :
15.6.27
As Follows :
15.6-27
As Follows :
15.5.1.27.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in Section 15 (5) of the Foreign Exchange Order applies to gyro astronomical navigation devices or devices that can measure the position or course by automatic tracking of celestial bodies or satellites. The program shall be designed so as to be applicable to Article 10 item (iv).
15.5.1-27.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in Section 15 (5) of the Foreign Exchange Order applies to gyro astronomical navigation devices or devices that can measure the position or course by automatic tracking of celestial bodies or satellites. The program shall be designed so as to be applicable to Article 10 item (iv).
15.5.2
(v)-2 Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of underwater sonar navigation systems (excluding those listed in 3).
15.5.2
(v)-2 Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of underwater sonar navigation systems (excluding those listed in 3).
15.3.27.2.4
(iv) Source code for real-time processing of acoustic data received using a submarine or port cable system.
15.3-27.2.4
(iv) Source code for real-time processing of acoustic data received using a submarine or port cable system.
15.1.27.1.1
(i) Technology required (excluding programs) for designing or manufacturing items that fall under any of Article 14, item (i) to (iii).
15.1-27.1.1
(i) Technology required (excluding programs) for designing or manufacturing items that fall under any of Article 14, item (i) to (iii).
15.1.27.1.2
(ii) Technology required (excluding programs) for designing or manufacturing items that fall under Article 14, item (vi) or item (vii).
15.1-27.1.2
(ii) Technology required (excluding programs) for designing or manufacturing items that fall under Article 14, item (vi) or item (vii).
15.1.27.1.3
(iii) Technology required for designing or manufacturing items that fall under Article 14, item 5 or item 5-2
15.1-27.1.3
(iii) Technology required for designing or manufacturing items that fall under Article 14, item 5 or item 5-2
15.1.27.1.5
(v) Technology required (excluding programs) for designing or manufacturing programs that fall under item 3.
15.1-27.1.5
(v) Technology required (excluding programs) for designing or manufacturing programs that fall under item 3.
15.2
(ii) Deleted
15.2
(ii) Deleted
15.5
As Follow
15.5
As Follow
15.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of underwater detectors utilizing acoustic waves
15.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of underwater detectors utilizing acoustic waves
15.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of inertial navigators or other equipment utilizing inertial forces
15.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of inertial navigators or other equipment utilizing inertial forces
15.4.27.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (iv) of the appended table of the Foreign Exchange Order shall fall under any of the following.
15.4-27.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (iv) of the appended table of the Foreign Exchange Order shall fall under any of the following.
15.4.27.3.2.b
(b) Navigation data from GPS or Glonass
15.4-27.3.2.b
(b) Navigation data from GPS or Glonass
15.6.27.6
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (vi) of the appended table of the Foreign Exchange Order shall be technology necessary for the design or manufacture of gas turbine engine components that fall under any of the following :
15.6-27.6
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (vi) of the appended table of the Foreign Exchange Order shall be technology necessary for the design or manufacture of gas turbine engine components that fall under any of the following :
15.4.27.3.2.a
(a) Speed data from radar using the Doppler effect
15.4-27.3.2.a
(a) Speed data from radar using the Doppler effect
15.1.27.1.4
(iv) Technology required for designing or manufacturing items that fall under Article 14, item (ix) or item (x).
15.1-27.1.4
(iv) Technology required for designing or manufacturing items that fall under Article 14, item (ix) or item (x).
15.6
(vi) Technology related to the design or manufacture of parts of gas turbine engines, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
15.6
(vi) Technology related to the design or manufacture of parts of gas turbine engines, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
15
Sensitive Materials
15
Sensitive Materials
15.3.27.2.5
(v) Programs (including source codes) falling under the following (a) or (b)
15.3-27.2.5
(v) Programs (including source codes) falling under the following (a) or (b)
15.3.27.2.5.a
(a) Those that carry out real time processing of sound data obtained from those falling under Article 9, item (i), (a), 6.
15.3-27.2.5.a
(a) Those that carry out real time processing of sound data obtained from those falling under Article 9, item (i), (a), 6.
15.5.2.27.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (v)-2 of the appended table of the Foreign Exchange Order shall fall under any of the following
15.5.2-27.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 15 (v)-2 of the appended table of the Foreign Exchange Order shall fall under any of the following
15.5.2.27.5.1
(i) Programs designed to enable the equipment to fall under Article 10, item (vii) by using underwater sonar navigation systems
15.5.2-27.5.1
(i) Programs designed to enable the equipment to fall under Article 10, item (vii) by using underwater sonar navigation systems
15.5.2.27.5.2
(ii) Programs that enable the equipment to fall under Article 10, item (vii) by continuously combining the heading data and the navigation data which falls under any of the following and using them in underwater sonar navigation systems (limited to those with source code)
15.5.2-27.5.2
(ii) Programs that enable the equipment to fall under Article 10, item (vii) by continuously combining the heading data and the navigation data which falls under any of the following and using them in underwater sonar navigation systems (limited to those with source code)
15.5.2.27.5.2.a
(a) Speed data from sonars that utilize doppler effects
15.5.2-27.5.2.a
(a) Speed data from sonars that utilize doppler effects
15.5.2.27.5.2.b
(b) Navigation data from GPS or Glonass
15.5.2-27.5.2.b
(b) Navigation data from GPS or Glonass
15.5.2.27.5.2.c
(c) Data from data-based referenced navigation systems
15.5.2-27.5.2.c
(c) Data from data-based referenced navigation systems
15.6.27.6.1.a
(a) Gas turbine blades, vanes or tip shrouds cast by unidirectional solidification or single crystal alloy methods, the stress breakage time of which is 400 hours or more when a load that generates a 200 megapascals stress is applied in the vertical direction to the crystal surface at 1,000 degrees centigrade
15.6-27.6.1.a
(a) Gas turbine blades, vanes or tip shrouds cast by unidirectional solidification or single crystal alloy methods, the stress breakage time of which is 400 hours or more when a load that generates a 200 megapascals stress is applied in the vertical direction to the crystal surface at 1,000 degrees centigrade
15.6.27.6.1.b
(b) An organic composite material that is designed to be used at temperatures exceeding 315 degreesand is produced as a raw material
15.6-27.6.1.b
(b) An organic composite material that is designed to be used at temperatures exceeding 315 degreesand is produced as a raw material
15.3.27.2.5.b
(b)Data processing to automatically detect the position of a person who is active in the water
15.3-27.2.5.b
(b)Data processing to automatically detect the position of a person who is active in the water
15.1.27.1.7
(vii) Technology required (excluding programs) for the designing of the programs of the previous item.
15.1-27.1.7
(vii) Technology required (excluding programs) for the designing of the programs of the previous item.
15.1.27.1.6
(vi) Technology required for designing or manufacturing items that fall under Article 14, item 8 or item 11.
15.1-27.1.6
(vi) Technology required for designing or manufacturing items that fall under Article 14, item 8 or item 11.
16
Corresponds to the Customs Tariff Law (Act No. 54 of Meiji 43), Appended Tables 25 to 40, 54 to 59, 63, 68 to 93, or 95. Technology related to cargo design, manufacturing or use specified by the Ordinance of the Ministry of Economy, Trade and Industry (excluding those listed in the middle column of paragraphs 1 to 15)
16
Corresponds to the Customs Tariff Law (Act No. 54 of Meiji 43), Appended Tables 25 to 40, 54 to 59, 63, 68 to 93, or 95. Technology related to cargo design, manufacturing or use specified by the Ordinance of the Ministry of Economy, Trade and Industry (excluding those listed in the middle column of paragraphs 1 to 15)
16.28
The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in the 16th section of the Foreign Exchange Ordinance is exclusively the Customs Tariff Law (Act No. 54 of Meiji 43), Appended Tables 25 to 40, 54 to 59, 63. It is a technology related to the design, manufacture or use of cargo that falls under the category, category 68 to 93 or category 95 .
16.28
The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in the 16th section of the Foreign Exchange Ordinance is exclusively the Customs Tariff Law (Act No. 54 of Meiji 43), Appended Tables 25 to 40, 54 to 59, 63. It is a technology related to the design, manufacture or use of cargo that falls under the category, category 68 to 93 or category 95 .

Related Content