Skip to main content
Global Trade Content (GTC)
Search
Search ONESOURCE Global Trade Support Help and Support.

This article applies to:

  • Product: ONESOURCE Global Trade
  • Sub-Product: Global trade content

FEO Old x New Classification 1 - 9 (English)

Current Numbers
Descriptions
New Numbers
Descriptions
1
Weapons
1
Weapons
1.1
Technology for the design, manufacture, or use of the goods listed in the middle column of row 1 of appended table 1 of the Export Trade Control Order
1.1
Technology for the design, manufacture, or use of the goods listed in the middle column of row 1 of appended table 1 of the Export Trade Control Order
2.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of the goods listed in the middle column of row 2 of appended table 1 of the Export Trade Control Order
2.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture, or use of the goods listed in the middle column of row 2 of appended table 1 of the Export Trade Control Order
2.2.15.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 2 (ii) of the appended table of the Foreign Exchange Order shall be, among those pertaining to programs that enable a device to function as numerically-controlled coordinate measuring equipment for the machine tool with 5 or more axes capable of contour control or the technology (excluding programs) for design, manufacture or use of those programs, technology necessary for enabling the numerical-control of 5 or more axes capable of contour control.
2.2-15.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 2 (ii) of the appended table of the Foreign Exchange Order shall be, among those pertaining to programs that enable a device to function as numerically-controlled coordinate measuring equipment for the machine tool with 5 or more axes capable of contour control or the technology (excluding programs) for design, manufacture or use of those programs, technology necessary for enabling the numerical-control of 5 or more axes capable of contour control.
2.1.15.1.3
(iii) Among programs designed for the design, manufacture or use of goods that fall under Article 1, item (xiv), or technologies (excluding programs) pertaining to the design, manufacture, or use of those programs, the technology necessary to attain or exceed the functions or characteristic of those goods (Except those that can not be directly using equipment for grinding of various programs for creating part programs to generate numerical control code)
2.1-15.1.3
(iii) Among programs designed for the design, manufacture or use of goods that fall under Article 1, item (xiv), or technologies (excluding programs) pertaining to the design, manufacture, or use of those programs, the technology necessary to attain or exceed the functions or characteristic of those goods (Except those that can not be directly using equipment for grinding of various programs for creating part programs to generate numerical control code)
2.1.15.1.4
(iv) Among technologies (excluding programs) pertaining to the design, manufacture, or use of goods that fall under any of Article 1, item (viii), (b), item (ix), item (x), (b), item (xi), item (xiv), from item (xvii) through item (xxiv), from item (xxvi) through (xxviii), from item (xxx) through item (l), item (lii), from item (liv) through item (lviii), or from item (lx) through item (lxii), the technology necessary to attain or exceed the functions or characteristics of those goods
2.1-15.1.4
(iv) Among technologies (excluding programs) pertaining to the design, manufacture, or use of goods that fall under any of Article 1, item (viii), (b), item (ix), item (x), (b), item (xi), item (xiv), from item (xvii) through item (xxiv), from item (xxvi) through (xxviii), from item (xxx) through item (l), item (lii), from item (liv) through item (lviii), or from item (lx) through item (lxii), the technology necessary to attain or exceed the functions or characteristics of those goods
2.1.15.1.2
(ii) Among programs designed for the use of goods that fall under any of Article 1, item (viii) (b), item (xi), item (xvii), item (xviii), inclusive, item (xix), item (xx), item (xxi), (a) or (b), 1. or 3. or item (xxxv) or item (xxxiv), or technologies (excluding programs) pertaining to the design, manufacture, or use of such programs, those necessary to attain or exceed the functions or characteristics of the goods
2.1-15.1.2
(ii) Among programs designed for the use of goods that fall under any of Article 1, item (viii) (b), item (xi), item (xvii), item (xviii), inclusive, item (xix), item (xx), item (xxi), (a) or (b), 1. or 3. or item (xxxv) or item (xxxiv), or technologies (excluding programs) pertaining to the design, manufacture, or use of such programs, those necessary to attain or exceed the functions or characteristics of the goods
2.1.15
As Follows :
2.1-15
As Follows :
2.2.15
As Follows :
2.2-15
As Follows :
2.1.15.1
The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry listed in the section 2 (1)of the appended table of foreign exchange order (hereinafter referred to as "foreign exchange order") shall fall under any of the following.
2.1-15.1
The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry listed in the section 2 (1)of the appended table of foreign exchange order (hereinafter referred to as "foreign exchange order") shall fall under any of the following.
2.2
(ii) Technology related to the use of numerical control devices, specified by the Ordinance of the Ministry of Economy, Trade and Industry
2.2
(ii) Technology related to the use of numerical control devices, specified by the Ordinance of the Ministry of Economy, Trade and Industry
2.1.15.1.5
(v) Goods that fall under any of Article 1 No. 6 (limited to equipment for separating lithium isotopes), No. 25, No. 29, No. 53 or No. 59. Technology related to design, manufacturing or use (excluding programs).
2.1-15.1.5
(v) Goods that fall under any of Article 1 No. 6 (limited to equipment for separating lithium isotopes), No. 25, No. 29, No. 53 or No. 59. Technology related to design, manufacturing or use (excluding programs).
2
Nuclear power
2
Nuclear power
2.1.15.1.6
(vi) Frequency converter (Excluding those falling under Article 1 viii-b) of program and extend the performance characteristics or design features by the applicable paragraph (b), or cryptographic keys or cryptographic code.
2.1-15.1.6
(vi) Frequency converter (Excluding those falling under Article 1 viii-b) of program and extend the performance characteristics or design features by the applicable paragraph (b), or cryptographic keys or cryptographic code.
2.1.15.1.7
(vii) Programs designed to extend or to release the performance characteristics of frequency converters corresponding to article 1 No. 8 (b);
2.1-15.1.7
(vii) Programs designed to extend or to release the performance characteristics of frequency converters corresponding to article 1 No. 8 (b);
2.1.15.1.8
(viii) Extending performance characteristics of High speed photography cameras or parts (Except for those corresponding to the Article 1, item 44) or by canceling the function, a program designed to fall under that item or a cryptographic key or cryptographic code.
2.1-15.1.8
(viii) Extending performance characteristics of High speed photography cameras or parts (Except for those corresponding to the Article 1, item 44) or by canceling the function, a program designed to fall under that item or a cryptographic key or cryptographic code.
2.1.15.1.9
(ix) A program designed to expand the performance characteristics of High speed photography cameras or parts (for those corresponding to the Article 1, item 44) or to release encryption keys or encryption codes.
2.1-15.1.9
(ix) A program designed to expand the performance characteristics of High speed photography cameras or parts (for those corresponding to the Article 1, item 44) or to release encryption keys or encryption codes.
2.1.15.1.1
(i) Technology pertaining to the design, manufacture or use of goods that fall under any of Article 1, item (i) through item (v), item (vi) (limited to the devices of mold processing of nuclear fuels), item (vii), item (viii)(a), item (x)(a), item (x)-2, or item (x)-3
2.1-15.1.1
(i) Technology pertaining to the design, manufacture or use of goods that fall under any of Article 1, item (i) through item (v), item (vi) (limited to the devices of mold processing of nuclear fuels), item (vii), item (viii)(a), item (x)(a), item (x)-2, or item (x)-3
3.1.1
(i) Technology for the design, manufacture, or use of the goods listed in row 3 (i) of appended table 1 of the Export Trade Control Order
3.1
(i) Technology for the design, manufacture, or use of the goods listed in row 3 (i) of appended table 1 of the Export Trade Control Order
3.1.2.15
As Follows :
3.2-15
As Follows :
3.1.2.15.2
(ii) The technology specified by the Ministry of Economy, Trade and Industry Ordinance in paragraph 3 (2) of the Foreign Exchange Ordinance is the function of the cargo among the technologies related to the design, manufacture or use of the cargo that falls under Article 2, Paragraph 2 or 3, or it is a technology necessary to reach or exceed the characteristics.
3.2-15.2
(ii) The technology specified by the Ministry of Economy, Trade and Industry Ordinance in paragraph 3 (2) of the Foreign Exchange Ordinance is the function of the cargo among the technologies related to the design, manufacture or use of the cargo that falls under Article 2, Paragraph 2 or 3, or it is a technology necessary to reach or exceed the characteristics.
3.1
As Follows :
Deleted ECN
Deleted Description
3.1.2
(ii) Technology related to the design, manufacture or use of cargo listed in the attached table 1-3 of the Export Ordinance items (2) or (3), which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
3.2
(ii) Technology related to the design, manufacture or use of cargo listed in the attached table 1-3 of the Export Ordinance items (2) or (3), which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
3
Chemical Weapons
3
Chemical Weapons
3.2.2.15
As Follows :
3.2.2-15
As Follows :
3.2.2.15.3
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in the attached table 3-2 (2) of the Foreign Exchange Ordinance is the function of the cargo among the technologies related to the design, manufacture or use of the cargo that falls under Article 2-2, Paragraph 2, or it is a technology necessary to reach or exceed the characteristics.
3.2.2-15.3
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in the attached table 3-2 (2) of the Foreign Exchange Ordinance is the function of the cargo among the technologies related to the design, manufacture or use of the cargo that falls under Article 2-2, Paragraph 2, or it is a technology necessary to reach or exceed the characteristics.
3.2.1
(i) Technology for the design or manufacture of the goods listed in row 3-2 (i) of appended table 1 of the Export Trade Control Order
3.2.1
(i) Technology for the design or manufacture of the goods listed in row 3-2 (i) of appended table 1 of the Export Trade Control Order
3.2.2
(ii) Technology related to cargo design, manufacturing or use listed in Appendix 1-3-2 (2) of the Export Ordinance, which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
3.2.2
(ii) Technology related to cargo design, manufacturing or use listed in Appendix 1-3-2 (2) of the Export Ordinance, which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
3.2
Biological Weapons
3.2
Biological Weapons
4.1.16.1.8
(viii) Programs designed for the operation, maintenance or inspection of goods that fall under any of Article 3, item (viii) through item (x)-2
4.1-16.1.8
(viii) Programs designed for the operation, maintenance or inspection of goods that fall under any of Article 3, item (viii) through item (x)-2
4.1.16.1.5
As Follows :
4.1-16.1.5
As Follows :
4.1.16.1.6
(vi) The technology (excluding programs) pertaining to the design, manufacture or use of rockets or unmanned aircraft that are capable of carrying a payload over a distance of 300 kilometers or more (excluding those capable of carrying a payload of 500 kilograms or more) or the goods that fall under any of Article 3, items (iii) through (vi) or items (vii) through (xxvii)
4.1-16.1.6
(vi) The technology (excluding programs) pertaining to the design, manufacture or use of rockets or unmanned aircraft that are capable of carrying a payload over a distance of 300 kilometers or more (excluding those capable of carrying a payload of 500 kilograms or more) or the goods that fall under any of Article 3, items (iii) through (vi) or items (vii) through (xxvii)
4.1.16.1.11
(xi) Programs designed for the design of rockets capable of carrying a payload over a distance of 300 kilometers or more, or goods that fall under Article 3, item (ii), (a) or goods that fall under (b) of the same item, or technology (excluding programs) for the design, manufacture, or use of those programs
4.1-16.1.11
(xi) Programs designed for the design of rockets capable of carrying a payload over a distance of 300 kilometers or more, or goods that fall under Article 3, item (ii), (a) or goods that fall under (b) of the same item, or technology (excluding programs) for the design, manufacture, or use of those programs
4.1.16.1.4
(iv) Production related to the design, manufacture or use of a rocket capable of transporting a payload of 500 kilograms or more for 300 kilometers or more, or a device or tool or test equipment for the manufacture thereof, or parts thereof, or cargoes falling under item 3, item 2 Technology (excluding programs)
4.1-16.1.4
(iv) Production related to the design, manufacture or use of a rocket capable of transporting a payload of 500 kilograms or more for 300 kilometers or more, or a device or tool or test equipment for the manufacture thereof, or parts thereof, or cargoes falling under item 3, item 2 Technology (excluding programs)
4.1.16
As Follows :
4.1-16
As Follows :
4.1.16.1.1
As Follows :
4.1-16.1.1
As Follows :
4.2.16
As Follows :
4.2-16
As Follows :
4.3.16
As Follows :
4.3-16
As Follows :
4.4.16
As Follows :
4.4-16
As Follows :
4.5.16
As Follows :
4.5-16
As Follows :
4.1.16.1.3
(iii) Design, manufacture or use of programs designed for designing, manufacturing or using equipment or tools or test equipment for manufacturing cargoes or parts thereof corresponding to Article 3, item 2 (a) or technology (excluding programs).
4.1-16.1.3
(iii) Design, manufacture or use of programs designed for designing, manufacturing or using equipment or tools or test equipment for manufacturing cargoes or parts thereof corresponding to Article 3, item 2 (a) or technology (excluding programs).
4.1.16.1.1.1
(i) A rocket capable of carrying a payload of 500 kilograms or more for 300 kilometers or more, or equipment or tools (including molds, the same shall apply hereinafter in this Article) or test equipment for manufacturing goods corresponding to Article 3, item 2 (b). A program designed to use these parts or cargo that falls under any of the items (2) or (3) of the same item, or technology(excluding programs) related to the design, manufacture or use of that program.
4.1-16.1.1.1
(i) A rocket capable of carrying a payload of 500 kilograms or more for 300 kilometers or more, or equipment or tools (including molds, the same shall apply hereinafter in this Article) or test equipment for manufacturing goods corresponding to Article 3, item 2 (b). A program designed to use these parts or cargo that falls under any of the items (2) or (3) of the same item, or technology(excluding programs) related to the design, manufacture or use of that program.
4.1.16.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (i) of the appended table of the Foreign Exchange Order shall be, among those pertaining to the design, manufacture, or use of goods that fall under Article 3, technology that falls under any of the following and is necessary to attain or exceed the functions or characteristics of the said goods.
4.1-16.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (i) of the appended table of the Foreign Exchange Order shall be, among those pertaining to the design, manufacture, or use of goods that fall under Article 3, technology that falls under any of the following and is necessary to attain or exceed the functions or characteristics of the said goods.
4.5.16.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (v) of the appended table of the Foreign Exchange Order shall be technology used to fix onto substrates substances formed by thermal decomposition of raw gas (limited to execution within the temperature range from 1,300 degrees centigrade to 2,900 degrees centigrade inclusive and the range of absolute pressure from 130 pascals to 20,000 pascals inclusive).
4.5-16.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (v) of the appended table of the Foreign Exchange Order shall be technology used to fix onto substrates substances formed by thermal decomposition of raw gas (limited to execution within the temperature range from 1,300 degrees centigrade to 2,900 degrees centigrade inclusive and the range of absolute pressure from 130 pascals to 20,000 pascals inclusive).
4.1.16.1.2
(ii) Programs designed for the use of rockets capable of carrying a payload of 500 kilograms or more a distance of 300 kilometers or more, and which can adjust the functions of two or more goods (limited to those that fall under Article 3, item (ii), (a), or (b)) or the technology (excluding programs) pertaining to the design, manufacture or use thereof
4.1-16.1.2
(ii) Programs designed for the use of rockets capable of carrying a payload of 500 kilograms or more a distance of 300 kilometers or more, and which can adjust the functions of two or more goods (limited to those that fall under Article 3, item (ii), (a), or (b)) or the technology (excluding programs) pertaining to the design, manufacture or use thereof
4.1.16.1.7
(vii) The technology (excluding programs) pertaining to programs designed for the design of the goods that fall under Article 3, item (iii), (b), (c), (e) or (f), or item (iv), or the design, manufacture, or use of those programs
4.1-16.1.7
(vii) The technology (excluding programs) pertaining to programs designed for the design of the goods that fall under Article 3, item (iii), (b), (c), (e) or (f), or item (iv), or the design, manufacture, or use of those programs
4.1.16.1.9
(ix) Programs designed for the design, manufacture, or use of goods that fall under any of Article 3, item (xiii) through item (xv) or item (xxvi) or technology (excluding programs) pertaining to the design, manufacture, or use of those programs
4.1-16.1.9
(ix) Programs designed for the design, manufacture, or use of goods that fall under any of Article 3, item (xiii) through item (xv) or item (xxvi) or technology (excluding programs) pertaining to the design, manufacture, or use of those programs
4.1.16.1.10
(x) Programs designed for the design or manufacture of goods that fall under Article 3, item (xvii), (a) or (f) or item (xvii)-2 or technology (excluding programs) pertaining to the design, manufacture, or use of those programs
4.1-16.1.10
(x) Programs designed for the design or manufacture of goods that fall under Article 3, item (xvii), (a) or (f) or item (xvii)-2 or technology (excluding programs) pertaining to the design, manufacture, or use of those programs
4.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design of avionics equipment or parts thereof (excluding those listed in (i) above)
4.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design of avionics equipment or parts thereof (excluding those listed in (i) above)
4.2.16.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (ii) of the appended table of the Foreign Exchange Order, shall be technology (excluding programs) pertaining to the design of rocket avionics equipment or components thereof and used for preventing the impact of electromagnetic pulses or electromagnetic interference.
4.2-16.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (ii) of the appended table of the Foreign Exchange Order, shall be technology (excluding programs) pertaining to the design of rocket avionics equipment or components thereof and used for preventing the impact of electromagnetic pulses or electromagnetic interference.
4.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of electronic computers for rockets or unmanned aerial vehicles (excluding those listed in (i) above)
4.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of electronic computers for rockets or unmanned aerial vehicles (excluding those listed in (i) above)
4.3.16.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
4.3-16.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 4 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
4.4.16.4
(4) The technology specified by the Ordinance of Ministry of Economy, Trade and Industry in row 4 (iv) of the appended table of the Foreign Exchange Order shall be technology pertaining to the use of autoclaves, and the data or procedures to provide for the environment inside the autoclaves (limited to those that use goods that fall under Article 3, item (xvi)).
4.4-16.4
(4) The technology specified by the Ordinance of Ministry of Economy, Trade and Industry in row 4 (iv) of the appended table of the Foreign Exchange Order shall be technology pertaining to the use of autoclaves, and the data or procedures to provide for the environment inside the autoclaves (limited to those that use goods that fall under Article 3, item (xvi)).
4.1.16.1.12
(xii) Programs that are designed for the use of rockets or unmanned aerial vehicle that can carry a payload of 300 kilometers or more (in the case of a program designed for using an unmanned aerial vehicle, it is designed or operated to operate a manned aircraft as an unmanned aerial vehicle ), which can adjust the functions of 2 or more cargoes (limited to those falling under Article 3, item (ii) (a) or (b))(excluding those that fall under item (ii))
4.1-16.1.12
(xii) Programs that are designed for the use of rockets or unmanned aerial vehicle that can carry a payload of 300 kilometers or more (in the case of a program designed for using an unmanned aerial vehicle, it is designed or operated to operate a manned aircraft as an unmanned aerial vehicle ), which can adjust the functions of 2 or more cargoes (limited to those falling under Article 3, item (ii) (a) or (b))(excluding those that fall under item (ii))
4.1
(i) Technology related to design, manufacturing or use of the goods listed in the middle column of row 4 of appended table 1 of the Export Ordinance, which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
4.1
(i) Technology related to design, manufacturing or use of the goods listed in the middle column of row 4 of appended table 1 of the Export Ordinance, which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
4.4
(iv) Technology related to the use of autoclaves, specified by the Ordinance of the Ministry of Economy, Trade and Industry
4.4
(iv) Technology related to the use of autoclaves, specified by the Ordinance of the Ministry of Economy, Trade and Industry
4.5
(v) Technology related to the use of equipment for fixing substances generated by thermal decomposition of raw material gas to a base material, which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
4.5
(v) Technology related to the use of equipment for fixing substances generated by thermal decomposition of raw material gas to a base material, which is specified by the Ordinance of the Ministry of Economy, Trade and Industry.
4
Missiles
4
Missiles
4.1.16.1.5.2
Techniques (excluding programs) relating to the design, manufacture or use of programs designed for operation, maintenance or inspection of cargoes falling under Article 3, item 11 or their programs.
4.1-16.1.5.2
Techniques (excluding programs) relating to the design, manufacture or use of programs designed for operation, maintenance or inspection of cargoes falling under Article 3, item 11 or their programs.
4.1.16.1.5.1
(v) Equipment, tools or test equipment for manufacturing cargo that falls under any of Article 3, items 3 (a) to (i) or parts thereof, or the same item (a), (ii), (iv), item Use cargo that falls under any of items 17 to 19, 21 to 22, 22 or 22 or 25 up to item 6. A program designed to do so, or a technology (excluding the program) related to the design, manufacture or use of the program.
4.1-16.1.5.1
(v) Equipment, tools or test equipment for manufacturing cargo that falls under any of Article 3, items 3 (a) to (i) or parts thereof, or the same item (a), (ii), (iv), item Use cargo that falls under any of items 17 to 19, 21 to 22, 22 or 22 or 25 up to item 6. A program designed to do so, or a technology (excluding the program) related to the design, manufacture or use of the program.
4.1.16.1.1.2
(ii) A program designed to operate, maintain or inspect cargo that falls under any of Article 3, item 2 (b) (4) to (6), or technology (excluding programs) related to the design, manufacture or use of that program.
4.1-16.1.1.2
(ii) A program designed to operate, maintain or inspect cargo that falls under any of Article 3, item 2 (b) (4) to (6), or technology (excluding programs) related to the design, manufacture or use of that program.
4.3.16.3.2
(ii) Technology (except for programs) for integrating flight control, guidance or propulsion data into flight management equipment in order to optimize the rocket's trajectory, which can carry payloads over 300 kilometers.
4.3-16.3.2
(ii) Technology (except for programs) for integrating flight control, guidance or propulsion data into flight management equipment in order to optimize the rocket's trajectory, which can carry payloads over 300 kilometers.
4.3.16.3.1
(i) Technologies (excluding programs) to integrate the airframe, propulsion units and lift control surfaces to optimize the in-flight aerodynamic performance of an unmanned aerial vehicle capable of carrying payloads over 300 kilometers.
4.3-16.3.1
(i) Technologies (excluding programs) to integrate the airframe, propulsion units and lift control surfaces to optimize the in-flight aerodynamic performance of an unmanned aerial vehicle capable of carrying payloads over 300 kilometers.
4.3.16.3.3
(iii) A program that processes data recorded during flight to enable position of the aircraft over the entire route during flight (limited to those that can be used for rockets or unmanned aerial vehicles capable of carrying payloads over 300 kilometers ) or technology (excluding the program) related to the design, manufacture or use of the program.
4.3-16.3.3
(iii) A program that processes data recorded during flight to enable position of the aircraft over the entire route during flight (limited to those that can be used for rockets or unmanned aerial vehicles capable of carrying payloads over 300 kilometers ) or technology (excluding the program) related to the design, manufacture or use of the program.
5.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and used for the design or manufacture of the goods listed in the middle column of row 5 of appended table 1 of the Export Trade Control Order
5.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and used for the design or manufacture of the goods listed in the middle column of row 5 of appended table 1 of the Export Trade Control Order
5.8
(viii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of electric wave absorbers or conductive polymers (excluding those listed in the middle column of row 4)
5.8
(viii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of electric wave absorbers or conductive polymers (excluding those listed in the middle column of row 4)
5.6
(vi) Deleted
5.6
(vi) Deleted
5.1.17.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following :
5.1-17.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following :
5.1.17.1.1
(i) Programs designed for the design or manufacture of items that fall under any of Article 4, item (iv) through item (vi)
5.1-17.1.1
(i) Programs designed for the design or manufacture of items that fall under any of Article 4, item (iv) through item (vi)
5.8.17.7
(8) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (viii) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the use of radio wave absorbers or conductive polymers that fall under Article 14, item (ii) (limited to those pertaining to installation, maintenance or repair).
5.8-17.7
(8) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (viii) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the use of radio wave absorbers or conductive polymers that fall under Article 14, item (ii) (limited to those pertaining to installation, maintenance or repair).
5.3.17.3.1
(i) Ceramic powder in the following from (a) until (c)applicable to all
5.3-17.3.1
(i) Ceramic powder in the following from (a) until (c)applicable to all
5.3.17.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item (3) of the Foreign Exchange Ordinance schedule 5, ceramic powder or ceramic (excluding those of composite type), and any of the following technologies (Excluding programs).
5.3-17.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item (3) of the Foreign Exchange Ordinance schedule 5, ceramic powder or ceramic (excluding those of composite type), and any of the following technologies (Excluding programs).
5.3.17.3.2
(ii) Ceramic made of substances of the previous item (excluding abrasives)
5.3-17.3.2
(ii) Ceramic made of substances of the previous item (excluding abrasives)
5.1.17
As Follows :
5.1-17
As Follows :
5.2.17
As Follows :
5.2-17
As Follows :
5.3.17
As Follows :
5.3-17
As Follows :
5.4.17
As Follows :
5.4-17
As Follows :
5.5.17
As Follows :
5.5-17
As Follows :
5.7.17
As Follows :
5.7-17
As Follows :
5.8.17
As Follows :
5.8-17
As Follows :
5.7.17.6
(7) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item 5 (7) of the Appendix to the Foreign Exchange Order shall fall under any of the followings.
5.7-17.6
(7) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item 5 (7) of the Appendix to the Foreign Exchange Order shall fall under any of the followings.
5.1.17.1.3
(iii) Technology (excluding programs) required for designing or manufacturing items that fall under any of Article 4, items 2 to 16 (excluding those that fall under the previous item)
5.1-17.1.3
(iii) Technology (excluding programs) required for designing or manufacturing items that fall under any of Article 4, items 2 to 16 (excluding those that fall under the previous item)
5.1.17.1.2
(ii) Technology (excluding programs) required for designing or manufacturing products that fall under Article 4, item 12 (c) or (d) or item (15) (c) or (d)
5.1-17.1.2
(ii) Technology (excluding programs) required for designing or manufacturing products that fall under Article 4, item 12 (c) or (d) or item (15) (c) or (d)
5.7
(vii) Technology related to the design of composite materials (excluding those listed in the middle column of row 4), specified by the Ordinance of the Ministry of Economy, Trade and Industry.
5.7
(vii) Technology related to the design of composite materials (excluding those listed in the middle column of row 4), specified by the Ordinance of the Ministry of Economy, Trade and Industry.
5.3
(iii) Technology in the design or manufacture of ceramic powders or ceramics case the specified by the Ordinance of the Ministry of economy (excluding those listed in (1) and paragraph 15)
5.3
(iii) Technology in the design or manufacture of ceramic powders or ceramics case the specified by the Ordinance of the Ministry of economy (excluding those listed in (1) and paragraph 15)
5.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of the goods listed in the middle column of row 5 of appended table 1 of the Export Trade Control Order
5.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of the goods listed in the middle column of row 5 of appended table 1 of the Export Trade Control Order
5.2.17.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
5.2-17.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
5.2.17.2.1
(i) Programs designed to use an item that falls under any of Article 4, item (iv) through item (vi)
5.2-17.2.1
(i) Programs designed to use an item that falls under any of Article 4, item (iv) through item (vi)
5.3.17.3.1.a
(a) Ceramic materials consisting of any of the following :
5.3-17.3.1.a
(a) Ceramic materials consisting of any of the following :
5.3.17.3.1.a.1
1. Single or composite oxides of zirconium and silicon or aluminum composite oxides
5.3-17.3.1.a.1
1. Single or composite oxides of zirconium and silicon or aluminum composite oxides
5.3.17.3.1.a.2
2. Single nitrides of boron (limited to cubic crystalline boron)
5.3-17.3.1.a.2
2. Single nitrides of boron (limited to cubic crystalline boron)
5.3.17.3.1.a.3
3. Single or composite carbides of silicon or boron
5.3-17.3.1.a.3
3. Single or composite carbides of silicon or boron
5.3.17.3.1.a.4
4. Single or composite nitrides of silicon
5.3-17.3.1.a.4
4. Single or composite nitrides of silicon
5.3.17.3.1.b
(b) Items in which the ratio of the content of metal impurities as a part of the total weight is less than following numeric values
5.3-17.3.1.b
(b) Items in which the ratio of the content of metal impurities as a part of the total weight is less than following numeric values
5.4.17.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (iv) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the design or manufacture of polybenzothiazole or polybenzoxazole.
5.4-17.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (iv) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the design or manufacture of polybenzothiazole or polybenzoxazole.
5.5.17.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (v) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the design or manufacture of rubber-like fluorine compounds including vinyl ether monomers.
5.5-17.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 5 (v) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the design or manufacture of rubber-like fluorine compounds including vinyl ether monomers.
5.2.17.2.2
(ii) The technology (excluding programs) pertaining to the use (limited to those pertaining to repairs) of an item that falls under Article 4, item (ii) or item (xii), (d) or Article 14, item (i).
5.2-17.2.2
(ii) The technology (excluding programs) pertaining to the use (limited to those pertaining to repairs) of an item that falls under Article 4, item (ii) or item (xii), (d) or Article 14, item (i).
5.3.17.3.1.b.1
(1) 0.1% for single oxides or single carbides
5.3-17.3.1.b.1
(1) 0.1% for single oxides or single carbides
5.3.17.3.1.b.2
(2) 0.5% for composite compounds or single nitrides
5.3-17.3.1.b.2
(2) 0.5% for composite compounds or single nitrides
5.3.17.3.1.c
(c) Any of the following:
5.3-17.3.1.c
(c) Any of the following:
5.3.17.3.1.c.1
(1) Zirconium oxide having an average particle diameter of 1 micrometer or less and having a total weight of particles having a diameter of more than 5 micrometers is 10% or less of the total weight.
5.3-17.3.1.c.1
(1) Zirconium oxide having an average particle diameter of 1 micrometer or less and having a total weight of particles having a diameter of more than 5 micrometers is 10% or less of the total weight.
5.3.17.3.1.c.2
(2) The average value of the particle diameter is 5 micrometers or less, and the total weight of the particles with a diameter of more than 10 micrometers is 10% or less of the total weight (excluding those corresponding to (1)).
5.3-17.3.1.c.2
(2) The average value of the particle diameter is 5 micrometers or less, and the total weight of the particles with a diameter of more than 10 micrometers is 10% or less of the total weight (excluding those corresponding to (1)).
5.4
(iv) Technology related to the design or manufacture of polybenzothiazole or polybenzoxazole, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
5.4
(iv) Technology related to the design or manufacture of polybenzothiazole or polybenzoxazole, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
5.5
(v) Technology related to the design or manufacture of rubber-like fluorine compounds containing vinyl ether monomers, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
5.5
(v) Technology related to the design or manufacture of rubber-like fluorine compounds containing vinyl ether monomers, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
5
Advanced Materials
5
Advanced Materials
5.7.17.6.2
(ii) Program for designing composite materials composed of organics, metals or carbon as a organic matrix composite materials (excluding those falling under the preceding item)
5.7-17.6.2
(ii) Program for designing composite materials composed of organics, metals or carbon as a organic matrix composite materials (excluding those falling under the preceding item)
5.7.17.6.1
(i) A program for designing items that fall under Article 4, item 12 (c) or (d) or item (15) (c) or (d).
5.7-17.6.1
(i) A program for designing items that fall under Article 4, item 12 (c) or (d) or item (15) (c) or (d).
6.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 6 of appended table 1 of the Export Trade Control Order
6.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 6 of appended table 1 of the Export Trade Control Order
6.5
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of hydraulic stretch forming machines (including its molds thereof) (excluding those listed in (iv) above)
6.5
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of hydraulic stretch forming machines (including its molds thereof) (excluding those listed in (iv) above)
6.1.18.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following :
6.1-18.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following :
6.2.18.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (ii) of the appended table of the Foreign Exchange Order shall be applicable to any of the following :
6.2-18.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (ii) of the appended table of the Foreign Exchange Order shall be applicable to any of the following :
6.3.18.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following :
6.3-18.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (iii) of the appended table of the Foreign Exchange Order shall fall under any of the following :
6.3.18.3.5
(v) The technology (excluding programs) pertaining to the coating method listed in the second column of the appended table 3 and coating listed in the fourth column of the same table and executed in respect to non-electronic substrates for coating technology listed in the third column in the same table.
6.3-18.3.5
(v) The technology (excluding programs) pertaining to the coating method listed in the second column of the appended table 3 and coating listed in the fourth column of the same table and executed in respect to non-electronic substrates for coating technology listed in the third column in the same table.
6.3.18.3.4
(iv) Technology related to the design of programs for incorporating expert systems supporting decision making into numerical control devices (excluding programs).
6.3-18.3.4
(iv) Technology related to the design of programs for incorporating expert systems supporting decision making into numerical control devices (excluding programs).
6.1.18
As Follows :
6.1-18
As Follows :
6.2.18
As Follows :
6.2-18
As Follows :
6.3.18
As Follows :
6.3-18
As Follows :
6.4.18
As Follows :
6.4-18
As Follows :
6.5.18
As Follows :
6.5-18
As Follows :
6.3.18.3.2
(ii) Delete
6.3-18.3.2
(ii) Delete
6.3.18.3.3
(iii) Delete
6.3-18.3.3
(iii) Delete
6.1.18.1.1.b
(B) Article 5 second item (3) or (ii) applicable to either of the third item or the fifth item
6.1-18.1.1.b
(B) Article 5 second item (3) or (ii) applicable to either of the third item or the fifth item
6.1.18.1.1
(i) Technology required (excluding programs) for designing or manufacturing any of the following:
6.1-18.1.1
(i) Technology required (excluding programs) for designing or manufacturing any of the following:
6.3.18.3.1
(i) A program that enables it to function as a numerical control device and has five or more axes capable of contour control, or technology required (excluding programs) for designing that program.
6.3-18.3.1
(i) A program that enables it to function as a numerical control device and has five or more axes capable of contour control, or technology required (excluding programs) for designing that program.
6.1.18.1.2
(ii) In addition to the technologies listed in the previous item, technologies required (excluding programs) for designing or manufacturing cargo that falls under Article 5
6.1-18.1.2
(ii) In addition to the technologies listed in the previous item, technologies required (excluding programs) for designing or manufacturing cargo that falls under Article 5
6.1.18.1.4
(iv) In addition to the items listed in the previous item, a program designed for designing or manufacturing cargo that falls under Article 5 or the technology required(excluding programs) to design that program.
6.1-18.1.4
(iv) In addition to the items listed in the previous item, a program designed for designing or manufacturing cargo that falls under Article 5 or the technology required(excluding programs) to design that program.
6.1.18.1.3
(iii) A program designed for designing or manufacturing a product falling under any of the following, or a technologies required (excluding a program) for designing the program.
6.1-18.1.3
(iii) A program designed for designing or manufacturing a product falling under any of the following, or a technologies required (excluding a program) for designing the program.
6.1.18.1.1.a
(a) Those that fall under any of Article 5, item (ii), (a) or (b), 1. or 2. which has a unidirectional positioning repeatability equal to or less than 0.0009 millimeters along one or more linear axis.
6.1-18.1.1.a
(a) Those that fall under any of Article 5, item (ii), (a) or (b), 1. or 2. which has a unidirectional positioning repeatability equal to or less than 0.0009 millimeters along one or more linear axis.
6.3
(iii) Technology related to the use of numerical control devices or coating devices, specified by the Ordinance of the Ministry of Economy, Trade and Industry (excluding those listed in the middle column of paragraph 2).
6.3
(iii) Technology related to the use of numerical control devices or coating devices, specified by the Ordinance of the Ministry of Economy, Trade and Industry (excluding those listed in the middle column of paragraph 2).
6.4.18.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in item 6 (4) of the Appended Table of the Foreign Exchange Order is technology related to the design of tools (including molds) for metal processing by superplastic forming, diffusion bonding, or direct pressure hydraulic press (Programs are excluded.).
6.4-18.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in item 6 (4) of the Appended Table of the Foreign Exchange Order is technology related to the design of tools (including molds) for metal processing by superplastic forming, diffusion bonding, or direct pressure hydraulic press (Programs are excluded.).
6.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or use of metal processing equipment or tools, including molds (excluding those listed in (i) to (iii) above)
6.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or use of metal processing equipment or tools, including molds (excluding those listed in (i) to (iii) above)
6.5.18.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (v) of the appended table shall be technology (excluding programs) pertaining to the design or manufacture of hydraulic stretch molding devices (including the mold thereof) for manufacture of aircraft materials.
6.5-18.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 6 (v) of the appended table shall be technology (excluding programs) pertaining to the design or manufacture of hydraulic stretch molding devices (including the mold thereof) for manufacture of aircraft materials.
6.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 6 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 2)
6.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 6 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 2)
6
Materials Processing
6
Materials Processing
6.2.18.2.1
(i) Programs designed to use items that fall under any of item 1, item 2, item 3, item 5 or item 11 of article 5.
6.2-18.2.1
(i) Programs designed to use items that fall under any of item 1, item 2, item 3, item 5 or item 11 of article 5.
6.2.18.2.2
(ii) A program designed or modified those falling under Article 5 item (iv) to operate the shape of the desired workpiece material removal functionality and dimensions of the workpiece shall be converted to numerical control commands optical design for processing.
6.2-18.2.2
(ii) A program designed or modified those falling under Article 5 item (iv) to operate the shape of the desired workpiece material removal functionality and dimensions of the workpiece shall be converted to numerical control commands optical design for processing.
6.2.18.2.3
(iii) Technology required (excluding programs) for the design of the programs listed in the preceding two items.
6.2-18.2.3
(iii) Technology required (excluding programs) for the design of the programs listed in the preceding two items.
6.1.18.1.3.b
(b) Any item falling under Article 5, item 2 (b) (3) or item d, item 3 or item 5
6.1-18.1.3.b
(b) Any item falling under Article 5, item 2 (b) (3) or item d, item 3 or item 5
6.1.18.1.3.a
(a) It corresponds to either Article 5, item 2 (a) or item (b) (1) or (2), which has a unidirectional positioning repeatability equal to or less than 0.0009 millimeters along one or more linear axis.
6.1-18.1.3.a
(a) It corresponds to either Article 5, item 2 (a) or item (b) (1) or (2), which has a unidirectional positioning repeatability equal to or less than 0.0009 millimeters along one or more linear axis.
7.1.19.1.2.b
(b) Among technologies that fall under any of item (i), (c) through (l) of the same Article, the technology necessary for the design or manufacture of integrated circuits that fall under the following 1. and 2.
7.1-19.1.2.b
(b) Among technologies that fall under any of item (i), (c) through (l) of the same Article, the technology necessary for the design or manufacture of integrated circuits that fall under the following 1. and 2.
7.1.19.1.2.b.1
1. Integrated circuits whose minimum line width which is 0.130 micrometers or more
7.1-19.1.2.b.1
1. Integrated circuits whose minimum line width which is 0.130 micrometers or more
7.1.19.1.3
(iii) Programs designed for the design or manufacture of circuits that fall under Article 6, item (xvi), (b).
7.1-19.1.3
(iii) Programs designed for the design or manufacture of circuits that fall under Article 6, item (xvi), (b).
7.3.19.3.3.a
(a) Vector processor unit designed to simultaneously perform more than two calculations on floating-point vectors
7.3-19.3.3.a
(a) Vector processor unit designed to simultaneously perform more than two calculations on floating-point vectors
7.5.19.5.3
(iii) The technology (excluding programs) pertaining to the design or manufacture of hetero-junction microchips (excluding high electron mobility transistors or hetero-junction bipolar transistors whose operating frequency is less than 31.8 gigahertz)
7.5-19.5.3
(iii) The technology (excluding programs) pertaining to the design or manufacture of hetero-junction microchips (excluding high electron mobility transistors or hetero-junction bipolar transistors whose operating frequency is less than 31.8 gigahertz)
7.1.19.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item 7 (1) of the appended table of the Foreign Exchange Order shall fall under any of the following :
7.1-19.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item 7 (1) of the appended table of the Foreign Exchange Order shall fall under any of the following :
7.5.19.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under article 7 (5) of the appended table of the Foreign Exchange Order shall fall under any of the following.
7.5-19.5
(5) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under article 7 (5) of the appended table of the Foreign Exchange Order shall fall under any of the following.
7.1.19
As Follows :
7.1-19
As Follows :
7.2.19
As Follows :
7.2-19
As Follows :
7.3.19
As Follows :
7.3-19
As Follows :
7.4.19
As Follows :
7.4-19
As Follows :
7.5.19
As Follows :
7.5-19
As Follows :
7.1.19.1.2.b.2
2. Integrated circuits that possess a multilayered structure (limited to those in which the number of metal layers is three or less)
7.1-19.1.2.b.2
2. Integrated circuits that possess a multilayered structure (limited to those in which the number of metal layers is three or less)
7.3.19.3.3.b
(b) Designed to be able to realize more than 4 floating point arithmetic processing of 64 bits or more per cycle
7.3-19.3.3.b
(b) Designed to be able to realize more than 4 floating point arithmetic processing of 64 bits or more per cycle
7.3.19.3.3
(iii) Technology (excluding programs) required for designing or manufacturing, among the core of the microprocessors, microcomputers, or microcontrollers, and has a bit width of access width of logical operation unit of 32 or more, corresponds to any of the following.
7.3-19.3.3
(iii) Technology (excluding programs) required for designing or manufacturing, among the core of the microprocessors, microcomputers, or microcontrollers, and has a bit width of access width of logical operation unit of 32 or more, corresponds to any of the following.
7.1.19.1.5
(v) Program Designed to design or manufacture items that fall under Article 6 (excluding items that fall under any of the preceding two items or items 1 or 18 to 24)
7.1-19.1.5
(v) Program Designed to design or manufacture items that fall under Article 6 (excluding items that fall under any of the preceding two items or items 1 or 18 to 24)
7.1.19.1.1
(i)Technology required for the design or manufacture of those falling under Article 6, item 2 c (1) 5 or 6 or (2) 3 or 2 (1) 5 or 6 or (2) 3 or 4 or item 16 b. (Excluding programs)
7.1-19.1.1
(i)Technology required for the design or manufacture of those falling under Article 6, item 2 c (1) 5 or 6 or (2) 3 or 2 (1) 5 or 6 or (2) 3 or 4 or item 16 b. (Excluding programs)
7.5.19.5.5
(v) Technology (excluding programs) related to the design or manufacture of vacuum electronic devices (including klystrons, traveling-wave tubes, and their derivatives) with an operating frequency of 31.8 GHz or higher.
7.5-19.5.5
(v) Technology (excluding programs) related to the design or manufacture of vacuum electronic devices (including klystrons, traveling-wave tubes, and their derivatives) with an operating frequency of 31.8 GHz or higher.
7.2.19.2
A program designed to use the technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in Section 7 (2) of the Foreign Exchange Ordinance, Article 6-17, a, b, d to f or n and
7.2-19.2
A program designed to use the technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in Section 7 (2) of the Foreign Exchange Ordinance, Article 6-17, a, b, d to f or n and
7.3.19.3.1
(i) A computational lithography program specifically designed to design mask or reticle patterns for equipment for manufacturing integrated circuits using extreme ultraviolet.
7.3-19.3.1
(i) A computational lithography program specifically designed to design mask or reticle patterns for equipment for manufacturing integrated circuits using extreme ultraviolet.
7.1.19.1.2.a
(a) The technology equired for manufacturing items that fall under item (xvi)-2 of the same Article.
7.1-19.1.2.a
(a) The technology equired for manufacturing items that fall under item (xvi)-2 of the same Article.
7.1.19.1.2
(ii) Items that fall under Article 6 (Items that fall under Article 6 (c) (1) 5 or 6 or (2) 3 or (1) 5 or 6 or (2) 3 or 4 or item 16 (b) of the same Article. Technology required (excluding programs) for designing or manufacturing that does not fall under any of the following:
7.1-19.1.2
(ii) Items that fall under Article 6 (Items that fall under Article 6 (c) (1) 5 or 6 or (2) 3 or (1) 5 or 6 or (2) 3 or 4 or item 16 (b) of the same Article. Technology required (excluding programs) for designing or manufacturing that does not fall under any of the following:
7.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 7 of appended table 1 of the Export Trade Control Order
7.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of goods listed in the middle column of row 7 of appended table 1 of the Export Trade Control Order
7.1.19.1.4
(iv) Programs designed for the design of integrated circuits that fall under Article 6, item (xvi)-2
7.1-19.1.4
(iv) Programs designed for the design of integrated circuits that fall under Article 6, item (xvi)-2
7.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 7 (xvi) of appended table 1 of the Export Trade Control Order
7.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the use of goods listed in the middle column of row 7 (xvi) of appended table 1 of the Export Trade Control Order
7.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of integrated circuits (excluding those listed in (i) above and in the middle column of row 4)
7.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of integrated circuits (excluding those listed in (i) above and in the middle column of row 4)
7.3.19.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 7 (iii) of the appended table of the Foreign Exchange Order
7.3-19.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 7 (iii) of the appended table of the Foreign Exchange Order
7.3.19.3.2
(ii) The technology (excluding programs) pertaining to the design or manufacture of substrates of integrated circuits whose insulators are made of silicon dioxide and that have silicon-on-insulator structure.
7.3-19.3.2
(ii) The technology (excluding programs) pertaining to the design or manufacture of substrates of integrated circuits whose insulators are made of silicon dioxide and that have silicon-on-insulator structure.
7.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacturing of equipment using superconducting materials (excluding those listed in (i) above)
7.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacturing of equipment using superconducting materials (excluding those listed in (i) above)
7.4.19.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 7 (iv) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the design or manufacture of electronic elements using superconductive materials.
7.4-19.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 7 (iv) of the appended table of the Foreign Exchange Order shall be technology (excluding programs) pertaining to the design or manufacture of electronic elements using superconductive materials.
7.5
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of electron tubes or microchips (excluding those listed in (i) above)
7.5
(v) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design or manufacture of electron tubes or microchips (excluding those listed in (i) above)
7.5.19.5.2
(ii) The technology (excluding programs) pertaining to the design or manufacture of vacuum microelectronics devices
7.5-19.5.2
(ii) The technology (excluding programs) pertaining to the design or manufacture of vacuum microelectronics devices
7.5.19.5.1
Deleted
7.5-19.5.1
Deleted
7.5.19.5.4
(iv) Technology related to the design or manufacture of substrates used as components of electronic devices that use diamond, silicon carbide or gallium oxide (excluding programs)
7.5-19.5.4
(iv) Technology related to the design or manufacture of substrates used as components of electronic devices that use diamond, silicon carbide or gallium oxide (excluding programs)
7
Electronics
7
Electronics
7.3.19.3.3.c
(c) Designed to be able to realize 16-bit fixed-point multiply-accumulate operation with more than 8 per cycle.
7.3-19.3.3.c
(c) Designed to be able to realize 16-bit fixed-point multiply-accumulate operation with more than 8 per cycle.
7.1.19.1.2.c
(c) Process design kit (excluding those that include libraries that implement the functions or technologies pertaining to goods that fall under either of the first to the eighth of the same article).
7.1-19.1.2.c
(c) Process design kit (excluding those that include libraries that implement the functions or technologies pertaining to goods that fall under either of the first to the eighth of the same article).
7.3.19.3.4
(iii) - A program specifically designed to restore a microcomputer or microprocessor to its normal state within 1 millisecond of interruption due to an electromagnetic pulse or electrostatic discharge without loss of operational continuity.
7.3-19.3.4
(iii) - A program specifically designed to restore a microcomputer or microprocessor to its normal state within 1 millisecond of interruption due to an electromagnetic pulse or electrostatic discharge without loss of operational continuity.
7.3.19.3.5
Flatness in any of the slicing, grinding and polishing techniques for the surface of a wafer with an exclusion area of 2 mm or less on the outer circumference of a silicon wafer with a diameter of 300 mm, divided into rectangles 26 mm long and 8 mm wide. Technology required to achieve a degree of 20 nanometers or less (excluding programs)
7.3-19.3.5
Flatness in any of the slicing, grinding and polishing techniques for the surface of a wafer with an exclusion area of 2 mm or less on the outer circumference of a silicon wafer with a diameter of 300 mm, divided into rectangles 26 mm long and 8 mm wide. Technology required to achieve a degree of 20 nanometers or less (excluding programs)
7.3.19.6
An ECAD program specifically designed for designing integrated circuits with gate-all-around field-effect transistor (GAAFET) structures, having any of the following:
7.3-19.6
An ECAD program specifically designed for designing integrated circuits with gate-all-around field-effect transistor (GAAFET) structures, having any of the following:
7.3.19.6.a
(a) Specifically designed for implementing Register Transfer Level (RTL) into GDSII or equivalent database file formats.
7.3-19.6.a
(a) Specifically designed for implementing Register Transfer Level (RTL) into GDSII or equivalent database file formats.
7.3.19.6.b
(b) Specifically designed to optimize the power consumption or the time required to transfer data in data processing within the designed integrated circuit
7.3-19.6.b
(b) Specifically designed to optimize the power consumption or the time required to transfer data in data processing within the designed integrated circuit
8.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture or use of goods listed in the middle column of row 8 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 4)
8.1
(i) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture or use of goods listed in the middle column of row 8 of appended table 1 of the Export Trade Control Order (excluding those listed in the middle column of row 4)
8.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture or use of electronic computers, auxiliaries thereof, or parts of such computers or auxiliaries (excluding those listed in (i) above and in the middle column of row 4)
8.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture or use of electronic computers, auxiliaries thereof, or parts of such computers or auxiliaries (excluding those listed in (i) above and in the middle column of row 4)
8.1.20
As Follows :
8.1-20
As Follows :
8.2.20
As Follows :
8.2-20
As Follows :
8.1.20.1
(i) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item (1) of item 8 of the Foreign Exchange Ordinance shall be the one falling under any of the following (the technology falling under items 1 to 6, excluding the program, Disclosure of security vulnerability or correspondence to cyber attack correspondence shall be excluded).
8.1-20.1
(i) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under item (1) of item 8 of the Foreign Exchange Ordinance shall be the one falling under any of the following (the technology falling under items 1 to 6, excluding the program, Disclosure of security vulnerability or correspondence to cyber attack correspondence shall be excluded).
8.1.20.1.1
(i) Technology required (excluding programs) for designing or manufacturing of items falling under Article 7, item (i), (b) or item (iii), (c) of the same Article.
8.1-20.1.1
(i) Technology required (excluding programs) for designing or manufacturing of items falling under Article 7, item (i), (b) or item (iii), (c) of the same Article.
8.1.20.1.3
(iii) Programs designed for the design or manufacture of items falling under Article 7, item (i), (b) or item (iii), (c) of the same Article or technology required (excluding programs) for the design or manufacture of those programs.
8.1-20.1.3
(iii) Programs designed for the design or manufacture of items falling under Article 7, item (i), (b) or item (iii), (c) of the same Article or technology required (excluding programs) for the design or manufacture of those programs.
8.1.20.1.4
(iv) Technology required (excluding programs) to use the program in the previous item.
8.1-20.1.4
(iv) Technology required (excluding programs) to use the program in the previous item.
8.1.20.1.6
(vi) Technology required (excluding programs) for the use of items falling under Article 7.
8.1-20.1.6
(vi) Technology required (excluding programs) for the use of items falling under Article 7.
8.2.20.2.4
(iv) Technology required (excluding programs) to use the program in the previous item.
8.2-20.2.4
(iv) Technology required (excluding programs) to use the program in the previous item.
8.1.20.1.2
(ii) In addition to the items listed in the previous item, technologies required (excluding programs) for designing or manufacturing cargo that fall under each item of Article 7.
8.1-20.1.2
(ii) In addition to the items listed in the previous item, technologies required (excluding programs) for designing or manufacturing cargo that fall under each item of Article 7.
8.1.20.1.5
(v) In addition to those listed in item (iii), programs designed for the design or manufacture of goods that fall under the items of Article 7, or technology required (excluding programs) for the design, manufacture, or use of those programs.
8.1-20.1.5
(v) In addition to those listed in item (iii), programs designed for the design or manufacture of goods that fall under the items of Article 7, or technology required (excluding programs) for the design, manufacture, or use of those programs.
8.2.20.2
(2) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under paragraph 8 (2) of the appended table of the Foreign Exchange Orderis one that falls under any of the following (the technology (excluding the program) corresponding to items 3 to 7. Excludes those related to disclosure of security vulnerability or response to cyber attacks.
8.2-20.2
(2) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under paragraph 8 (2) of the appended table of the Foreign Exchange Orderis one that falls under any of the following (the technology (excluding the program) corresponding to items 3 to 7. Excludes those related to disclosure of security vulnerability or response to cyber attacks.
8.2.20.2.3
(iii) A program designed for designing or manufacturing a digital computer falling under any of the following, or technology required (excluding a program) necessary for designing or manufacturing that program.
8.2-20.2.3
(iii) A program designed for designing or manufacturing a digital computer falling under any of the following, or technology required (excluding a program) necessary for designing or manufacturing that program.
8.2.20.2.1
(i) Technology required (excluding programs) for designing or manufacturing of digital computers that fall under any of the following.
8.2-20.2.1
(i) Technology required (excluding programs) for designing or manufacturing of digital computers that fall under any of the following.
8.2.20.2.5
(v) A part designed to improve the functions of a digital electronic computer, designed or designed to manufacture a weighted maximum performance of more than 15 effective tera operations and less than 70 tera operations by assembling calculation elements, or technology necessary for the design, manufacture, or use of the program (excluding programs).
8.2-20.2.5
(v) A part designed to improve the functions of a digital electronic computer, designed or designed to manufacture a weighted maximum performance of more than 15 effective tera operations and less than 70 tera operations by assembling calculation elements, or technology necessary for the design, manufacture, or use of the program (excluding programs).
8.2.20.2.2
(ii) Design or manufacture of parts designed to improve the functions of digital electronic computers, and whose weighted maximum performance exceeds 15 effective tera-operations and does not exceed 70 effective tera-operations by aggregating computational elements. Technology required for (excluding programs)
8.2-20.2.2
(ii) Design or manufacture of parts designed to improve the functions of digital electronic computers, and whose weighted maximum performance exceeds 15 effective tera-operations and does not exceed 70 effective tera-operations by aggregating computational elements. Technology required for (excluding programs)
8
Computers
8
Computers
8.2.20.2.7
(vii) Technology required (excluding programs) for designing Intrusion programs.
8.2-20.2.7
(vii) Technology required (excluding programs) for designing Intrusion programs.
8.2.20.2.6
(vi) Programs designed or modified to create, control or distribute intrusion programs (specially designed to update or improve the program, with the permission of the owner or administrator of the system to receive it), or technology required (excluding programs) to design, manufacture or use of that program.
8.2-20.2.6
(vi) Programs designed or modified to create, control or distribute intrusion programs (specially designed to update or improve the program, with the permission of the owner or administrator of the system to receive it), or technology required (excluding programs) to design, manufacture or use of that program.
8.2.20.2.1.a
(a) Having an Adjusted Peak Performance exceeding 15 Weighted TeraFLOPS (WT) and less than 16 Weighted TeraFLOPS (WT)
8.2-20.2.1.a
(a) Having an Adjusted Peak Performance exceeding 15 Weighted TeraFLOPS (WT) and less than 16 Weighted TeraFLOPS (WT)
8.2.20.2.3.a
(a) Having an Adjusted Peak Performance exceeding 15 Weighted TeraFLOPS (WT) and less than 16 Weighted TeraFLOPS (WT)
8.2-20.2.3.a
(a) Having an Adjusted Peak Performance exceeding 15 Weighted TeraFLOPS (WT) and less than 16 Weighted TeraFLOPS (WT)
8.2.20.2.1.b
(b) Having an Adjusted Peak Performance exceeding 16 Weighted TeraFLOPS (WT) and less than or equal to 70 Weighted TeraFLOPS (WT)
8.2-20.2.1.b
(b) Having an Adjusted Peak Performance exceeding 16 Weighted TeraFLOPS (WT) and less than or equal to 70 Weighted TeraFLOPS (WT)
8.2.20.2.3.b
(b) Having an Adjusted Peak Performance of more than 16 Weighted TeraFLOPS (WT) and less than 70 Weighted TeraFLOPS (WT).
8.2-20.2.3.b
(b) Having an Adjusted Peak Performance of more than 16 Weighted TeraFLOPS (WT) and less than 70 Weighted TeraFLOPS (WT).
9.1.21.1.1
(i) The technology (excluding programs) necessary for the design or manufacture of items that fall under Article 8, item (ii), (a), 2.
9.1-21.1.1
(i) The technology (excluding programs) necessary for the design or manufacture of items that fall under Article 8, item (ii), (a), 2.
9.1.21.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 9 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
9.1-21.1
(1) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 9 (i) of the appended table of the Foreign Exchange Order shall fall under any of the following.
9.2.21.2.11
(xi) The technology (excluding programs) pertaining to the design of the wireless base station receiver used for digital cellular wireless communication and signal reception functions of which is capable of modifying in order to enable multiband, multiple channels, multimode, multi-coding algorithms or multiprotocol operation by switching programs
9.2-21.2.11
(xi) The technology (excluding programs) pertaining to the design of the wireless base station receiver used for digital cellular wireless communication and signal reception functions of which is capable of modifying in order to enable multiband, multiple channels, multimode, multi-coding algorithms or multiprotocol operation by switching programs
9.2.21.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 9 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
9.2-21.2
(2) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 9 (ii) of the appended table of the Foreign Exchange Order shall fall under any of the following.
9.2.21.2.3.1
(iii) Deleted.
9.2-21.2.3.1
(iii) Deleted.
9.2.21.2.3.2.b.4
4. Those that use light wavelength multiplex technology and wherein the spacing of optical carrier waves is less than 100 gigahertz
9.2-21.2.3.2.b.4
4. Those that use light wavelength multiplex technology and wherein the spacing of optical carrier waves is less than 100 gigahertz
9.2.21.2.3.2.d.2
2. Wireless transmitters or wireless receivers that can be used at frequencies that exceed 31.8 gigahertz (excluding frequency bands allocated for wireless communication by the International Telecommunication Union (excluding the frequency bands allocated for radio determinations))
9.2-21.2.3.2.d.2
2. Wireless transmitters or wireless receivers that can be used at frequencies that exceed 31.8 gigahertz (excluding frequency bands allocated for wireless communication by the International Telecommunication Union (excluding the frequency bands allocated for radio determinations))
9.2.21.2.3.2.e
(e) Deleted.
9.2-21.2.3.2.e
(e) Deleted.
9.2.21.2.4
(iv) Deleted.
9.2-21.2.4
(iv) Deleted.
9.2.21.2.14
(xiv) The technology (excluding programs) pertaining to the design of transmission communication devices and to the design of spread spectrum (including frequency hopping)
9.2-21.2.14
(xiv) The technology (excluding programs) pertaining to the design of transmission communication devices and to the design of spread spectrum (including frequency hopping)
9.2.21.2.3.2.b.1
1. Those that utilize laser beams whose wave length exceeds 1,750 nanometers
9.2-21.2.3.2.b.1
1. Those that utilize laser beams whose wave length exceeds 1,750 nanometers
9.2.21.2.3.2.d
(d) Wireless transmitters or wireless receivers that fall under any of the following
9.2-21.2.3.2.d
(d) Wireless transmitters or wireless receivers that fall under any of the following
9.1.21.1.2
As Follows :
9.1-21.1.2
As Follows :
9.2.21.2.3.2.b.2
2. Deleted.
9.2-21.2.3.2.b.2
2. Deleted.
9.2.21.2.3.2.d.1
1. Using a quadrature amplitude modulation technique exceeding 1,024 value
9.2-21.2.3.2.d.1
1. Using a quadrature amplitude modulation technique exceeding 1,024 value
9.2.21.2.3.2.a
(a) Deleted.
9.2-21.2.3.2.a
(a) Deleted.
9.1.21.1.9
(ix) A program which has a function equivalent to the function of a cargo falling under any of item 10 or item 11 from Article 8, item 9 (a) or (c) to (h), or those capable of simulating the function (In the case pertaining to Article 8, item 9 (a) or (c) to (h), of the ones using only public or commercial cryptographic standards, except those whose functions are limited to those related to operation, management or maintenance.)
9.1-21.1.9
(ix) A program which has a function equivalent to the function of a cargo falling under any of item 10 or item 11 from Article 8, item 9 (a) or (c) to (h), or those capable of simulating the function (In the case pertaining to Article 8, item 9 (a) or (c) to (h), of the ones using only public or commercial cryptographic standards, except those whose functions are limited to those related to operation, management or maintenance.)
9.1.21
As Follows :
9.1-21
As Follows :
9.2.21
As Follows :
9.2-21
As Follows :
9.1.21.1.3
(iii) Technology (excluding programs) required for the use of those that fall under any of Article 8, items 9 to 12 (excluding those that fall under Article 11, item 11 (b))
9.1-21.1.3
(iii) Technology (excluding programs) required for the use of those that fall under any of Article 8, items 9 to 12 (excluding those that fall under Article 11, item 11 (b))
9.1
(i) Technology related to cargo design, manufacturing or use listed in the middle column of item 9 of the appended table 1 of the Export Ordinance, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
9.1
(i) Technology related to cargo design, manufacturing or use listed in the middle column of item 9 of the appended table 1 of the Export Ordinance, specified by the Ordinance of the Ministry of Economy, Trade and Industry.
9.2.21.2.3.2.c
(c) Devices having an optical switching function and an optical signal switching time of less than 1 millisecond
9.2-21.2.3.2.c
(c) Devices having an optical switching function and an optical signal switching time of less than 1 millisecond
9.2.21.2.3.2
(iii)-2 Programs for designing or manufacturing of transmission communication devices or electronic switching devices that fall under (b), 1. or (v) or 1., or the technology (excluding programs) necessary for the design or manufacture of those falling under any of the following:
9.2-21.2.3.2
(iii)-2 Programs for designing or manufacturing of transmission communication devices or electronic switching devices that fall under (b), 1. or (v) or 1., or the technology (excluding programs) necessary for the design or manufacture of those falling under any of the following:
9.2.21.2.3.2.b.5
(5) Devices using analog transmission systems with a bandwidth exceeding 2.5 gigahertz (excluding devices for TV broadcasting (including cable TV broadcasting)).
9.2-21.2.3.2.b.5
(5) Devices using analog transmission systems with a bandwidth exceeding 2.5 gigahertz (excluding devices for TV broadcasting (including cable TV broadcasting)).
9.1.21.1.4
Technology (excluding programs) required for the use (excluding those related to operation) of items that fall under any of Article 8, item 1, item 2 or items 4 to 5-5.
9.1-21.1.4
Technology (excluding programs) required for the use (excluding those related to operation) of items that fall under any of Article 8, item 1, item 2 or items 4 to 5-5.
9.1.21.1.6
Program designed to design or manufacture items that fall under any of Article 8, items 1, 2, 4 to 5-5 (excluding those that fall under the previous item).
9.1-21.1.6
Program designed to design or manufacture items that fall under any of Article 8, items 1, 2, 4 to 5-5 (excluding those that fall under the previous item).
9.1.21.1.8.1
A program designed or modified to use any of Article 8, item 1, item 2 or item 4 to item 5-5.
9.1-21.1.8.1
A program designed or modified to use any of Article 8, item 1, item 2 or item 4 to item 5-5.
9.1.21.1.7
A program designed or modified to design, or manufacture, any of Article 8 No. 9 to No. 11 (a) or item 9 of this paragraph.
9.1-21.1.7
A program designed or modified to design, or manufacture, any of Article 8 No. 9 to No. 11 (a) or item 9 of this paragraph.
9.1.21.1.8.2
A program designed or modified to use any of Article 8 No. 9 to No. 11 (a) or item 9 of this paragraph.
9.1-21.1.8.2
A program designed or modified to use any of Article 8 No. 9 to No. 11 (a) or item 9 of this paragraph.
9.1.21.1.16
Technology (excluding programs) that has the function corresponding to Article 8-9 (b) and that activates the cryptographic function of a certain cargo or a certain program only by using the means for enabling the cryptographic function.
9.1-21.1.16
Technology (excluding programs) that has the function corresponding to Article 8-9 (b) and that activates the cryptographic function of a certain cargo or a certain program only by using the means for enabling the cryptographic function.
9.1.21.1.17
A program having a function corresponding to Article 8-9 (b) that activates the cryptographic function of a certain cargo or a certain program only by using the means for enabling the cryptographic function.
9.1-21.1.17
A program having a function corresponding to Article 8-9 (b) that activates the cryptographic function of a certain cargo or a certain program only by using the means for enabling the cryptographic function.
9.1.21.1.5
(v) Programs designed for the design or manufacture of items that fall under Article 8, item (ii), (a), 2.
9.1-21.1.5
(v) Programs designed for the design or manufacture of items that fall under Article 8, item (ii), (a), 2.
9.1.21.1.8
As Follows :
9.1-21.1.8
As Follows :
9.1.21.1.11
As Follows :
9.1-21.1.11
As Follows :
9.1.21.1.11.1
(xi) The technology (excluding programs) necessary for the design or manufacture of the programs in item (v)
9.1-21.1.11.1
(xi) The technology (excluding programs) necessary for the design or manufacture of the programs in item (v)
9.1.21.1.11.2
(xi)-2 The technology (excluding programs) necessary for the use of the program in item (v) (excluding those pertaining to operations)
9.1-21.1.11.2
(xi)-2 The technology (excluding programs) necessary for the use of the program in item (v) (excluding those pertaining to operations)
9.1.21.1.12
As Follows :
9.1-21.1.12
As Follows :
9.1.21.1.13
(xiii) The technology (excluding programs) necessary for the design, manufacture or use (excluding those that pertains to operations) of the programs in item (vi) or item (viii)
9.1-21.1.13
(xiii) The technology (excluding programs) necessary for the design, manufacture or use (excluding those that pertains to operations) of the programs in item (vi) or item (viii)
9.1.21.1.14
(xiv) Deleted.
9.1-21.1.14
(xiv) Deleted.
9.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture or use of goods listed in the middle column of row 9 (i) to (iii) or (v) to (vi) of appended table 1 of the Export Trade Control Order (excluding those listed in (i) above and in the middle column of row 15)
9.2
(ii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry and employed in the design, manufacture or use of goods listed in the middle column of row 9 (i) to (iii) or (v) to (vi) of appended table 1 of the Export Trade Control Order (excluding those listed in (i) above and in the middle column of row 15)
9.2.21.2.1
(i) Deleted.
9.2-21.2.1
(i) Deleted.
9.2.21.2.2
(ii) Programs designed to provide the functions equivalent to those of goods that fall under any of Article 8, item (i), item (ii), item (iv) through item (vii) or item (viii)-2.
9.2-21.2.2
(ii) Programs designed to provide the functions equivalent to those of goods that fall under any of Article 8, item (i), item (ii), item (iv) through item (vii) or item (viii)-2.
9.2.21.2.3
As Follows :
9.2-21.2.3
As Follows :
9.2.21.2.3.2.b
(b) Those that use laser oscillators and that fall under any of the following
9.2-21.2.3.2.b
(b) Those that use laser oscillators and that fall under any of the following
9.2.21.2.5
(v) The technology (excluding programs) necessary for the design or manufacture of transmission communication devices designed to be mounted on satellites
9.2-21.2.5
(v) The technology (excluding programs) necessary for the design or manufacture of transmission communication devices designed to be mounted on satellites
9.2.21.2.7
(vii) Deleted.
9.2-21.2.7
(vii) Deleted.
9.2.21.2.8
(viii) Deleted.
9.2-21.2.8
(viii) Deleted.
9.2.21.2.9
(ix) Deleted.
9.2-21.2.9
(ix) Deleted.
9.2.21.2.10
(x) Deleted.
9.2-21.2.10
(x) Deleted.
9.2.21.2.12
(xii) Deleted.
9.2-21.2.12
(xii) Deleted.
9.2.21.2.13
(xiii) Deleted.
9.2-21.2.13
(xiii) Deleted.
9.1.21.1.10
(x) Deleted.
9.1-21.1.10
(x) Deleted.
9.1.21.1.12.1
(xii) Technology (excluding programs) necessary for the design or manufacture of the program of item 7, item 8 (2) or item 9.
9.1-21.1.12.1
(xii) Technology (excluding programs) necessary for the design or manufacture of the program of item 7, item 8 (2) or item 9.
9.1.21.1.15
(xv) Deleted.
9.1-21.1.15
(xv) Deleted.
9.2.21.2.3.2.b.3
3. Deleted.
9.2-21.2.3.2.b.3
3. Deleted.
9.1.21.1.12.2
(xii) Techniques required to use the program of No. 7, 8-2 or 9 (excluding programs)
9.1-21.1.12.2
(xii) Techniques required to use the program of No. 7, 8-2 or 9 (excluding programs)
9.2.21.2.6
(vi) Technology (excluding programs) pertaining to the design or use of laser-based communication technology that can automatically receive and track signals and communicate with outside the atmosphere or underwater.
9.2-21.2.6
(vi) Technology (excluding programs) pertaining to the design or use of laser-based communication technology that can automatically receive and track signals and communicate with outside the atmosphere or underwater.
9
Communications
9
Communications
9.3.21.3.1
(i) Rated for operation at frequencies exceeding 2.7 GHz and 6.8 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 15%, and having any of the following:
9.3-21.3.1
(i) Rated for operation at frequencies exceeding 2.7 GHz and 6.8 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 15%, and having any of the following:
9.3.21.3.2
(ii) Rated for operation at frequencies exceeding 6.8 GHz and 16 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%, and having any of the following:
9.3-21.3.2
(ii) Rated for operation at frequencies exceeding 6.8 GHz and 16 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%, and having any of the following:
9.3.21.3.3
(iii) Rated for operation with a peak saturated power output greater than 3.0 Watts (34.77 dBm) at operating frequencies exceeding 16 GHz and 31.8 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%
9.3-21.3.3
(iii) Rated for operation with a peak saturated power output greater than 3.0 Watts (34.77 dBm) at operating frequencies exceeding 16 GHz and 31.8 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%
9.3.21.3.4
(iv) Rated for operation with a peak saturated power output greater than 0.1n W (minus 70 dBm) at operating frequencies exceeding 31.8 GHz and 37 GHz or less
9.3-21.3.4
(iv) Rated for operation with a peak saturated power output greater than 0.1n W (minus 70 dBm) at operating frequencies exceeding 31.8 GHz and 37 GHz or less
9.3.21.3.5
(v) Rated for operation with a peak saturated power output greater than 1.0 watts (30 dBm) at operating frequencies exceeding 37 GHz and 43.5 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%
9.3-21.3.5
(v) Rated for operation with a peak saturated power output greater than 1.0 watts (30 dBm) at operating frequencies exceeding 37 GHz and 43.5 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%
9.3.21.3.6
(vi) Rated for operation with a peak saturated power output greater than 31.62 milliwatt (15 dBm) at operating frequencies exceeding 43.5 GHz and 75 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%
9.3-21.3.6
(vi) Rated for operation with a peak saturated power output greater than 31.62 milliwatt (15 dBm) at operating frequencies exceeding 43.5 GHz and 75 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 10%
9.3.21.3.7
(vii) Rated for operation with a peak saturated power output greater than 10 mW (10 dBm) at operating frequencies exceeding 75 GHz and 90 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 5%
9.3-21.3.7
(vii) Rated for operation with a peak saturated power output greater than 10 mW (10 dBm) at operating frequencies exceeding 75 GHz and 90 GHz or less, of those with values divided by the center frequency of the instantaneous bandwidth is more than 5%
9.3.21.3.8
(viii) Rated for operation with a peak saturated power output greater than 0.1 nW (minus 70 dBm) at operating frequencies exceeding 90 GHz.
9.3-21.3.8
(viii) Rated for operation with a peak saturated power output greater than 0.1 nW (minus 70 dBm) at operating frequencies exceeding 90 GHz.
9.3.21
As Follows :
9.3-21
As Follows :
9.4.21
As Follows :
9.4-21
As Follows :
9.4.21.4.1
(i) Those having current switching functions for digital circuits having superconducting gates, with values obtained by multiplying delay time per gate by power consumption per gate less than 1/100,000,000,000 millijoules
9.4-21.4.1
(i) Those having current switching functions for digital circuits having superconducting gates, with values obtained by multiplying delay time per gate by power consumption per gate less than 1/100,000,000,000 millijoules
9.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry for microwave integrated circuit designed for the communication design or manufacture, shall the (except those listed in the middle column of row 7).
9.3
(iii) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry for microwave integrated circuit designed for the communication design or manufacture, shall the (except those listed in the middle column of row 7).
9.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry employed in the design or manufacture of communication equipment based on superconducting materials (except those listed in the middle column of row 7).
9.4
(iv) Technology specified by the Ordinance of the Ministry of Economy, Trade and Industry employed in the design or manufacture of communication equipment based on superconducting materials (except those listed in the middle column of row 7).
9.4.21.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 9 (iv) of the appended table of the Foreign Exchange Order shall be the technology (excluding programs) necessary for the design or manufacture of telecommunications equipment using superconductive materials that is designed to be capable of being used at temperatures below the critical temperature of the superconductive material used, and that falls under any of the following
9.4-21.4
(4) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry in row 9 (iv) of the appended table of the Foreign Exchange Order shall be the technology (excluding programs) necessary for the design or manufacture of telecommunications equipment using superconductive materials that is designed to be capable of being used at temperatures below the critical temperature of the superconductive material used, and that falls under any of the following
9.2.21.2.3.2.f
(f) Those exclusively designed for use in mobile bodies, that fall under the following 1. and 2.
9.2-21.2.3.2.f
(f) Those exclusively designed for use in mobile bodies, that fall under the following 1. and 2.
9.2.21.2.3.2.f.1
1. Those that can be used at an optical wavelength of 200 nanometers or more and 400 nanometers or less
9.2-21.2.3.2.f.1
1. Those that can be used at an optical wavelength of 200 nanometers or more and 400 nanometers or less
9.2.21.2.3.2.f.2
2. Those used in local area networks
9.2-21.2.3.2.f.2
2. Those used in local area networks
9.4.21.4.2
(ii) Those having a frequency separation function and resonant circuits with Q-values exceeding 10,000
9.4-21.4.2
(ii) Those having a frequency separation function and resonant circuits with Q-values exceeding 10,000
9.3.21.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under the item 9 (iii) of the appended table of the Foreign Exchange Order is a monolithic microwave integrated circuit amplifier designed for communication, which is equivalent to any of the following technologies (Excluding programs).
9.3-21.3
(3) The technology specified by the Ordinance of the Ministry of Economy, Trade and Industry under the item 9 (iii) of the appended table of the Foreign Exchange Order is a monolithic microwave integrated circuit amplifier designed for communication, which is equivalent to any of the following technologies (Excluding programs).
9.2.21.2.3.2.d.3
(3) Among devices which can be used within a frequency range of 1.5 to 87.5 megahertz and which use adaptive interference signal suppression technology, those designed to suppress interference signals by exceeding 15 decibels
9.2-21.2.3.2.d.3
(3) Among devices which can be used within a frequency range of 1.5 to 87.5 megahertz and which use adaptive interference signal suppression technology, those designed to suppress interference signals by exceeding 15 decibels
9.3.21.3.1.a
(a) A peak saturated power output greater than 75 W (48.75 dBm) at operating frequency exceeding 2.7 GHz and 2.9 GHz or less
9.3-21.3.1.a
(a) A peak saturated power output greater than 75 W (48.75 dBm) at operating frequency exceeding 2.7 GHz and 2.9 GHz or less
9.3.21.3.1.b
(b) A peak saturated power output greater than 55 W (47.4 dBm) at operating frequency exceeding 2.9 GHz and 3.2 GHz or less
9.3-21.3.1.b
(b) A peak saturated power output greater than 55 W (47.4 dBm) at operating frequency exceeding 2.9 GHz and 3.2 GHz or less
9.3.21.3.1.c
(c) A peak saturated power output greater than 40 W (46 dBm) at operating frequency exceeding 3.2 GHz and 3.7 GHz or less
9.3-21.3.1.c
(c) A peak saturated power output greater than 40 W (46 dBm) at operating frequency exceeding 3.2 GHz and 3.7 GHz or less
9.3.21.3.1.d
(d) A peak saturated power output greater than 20 W (43 dBm) at operating frequency exceeding 3.7 GHz and 6.8 GHz or less
9.3-21.3.1.d
(d) A peak saturated power output greater than 20 W (43 dBm) at operating frequency exceeding 3.7 GHz and 6.8 GHz or less
9.3.21.3.2.a
(a) A peak saturated power output 10W (40 dBm) at operating frequency exceeding 6.8 GHz and 8.5 GHz or less
9.3-21.3.2.a
(a) A peak saturated power output 10W (40 dBm) at operating frequency exceeding 6.8 GHz and 8.5 GHz or less
9.3.21.3.2.b
(b) A peak saturated power output greater than 5W (37 dBm) at operating frequency exceeding 8.5 GHz and 16 GHz or less
9.3-21.3.2.b
(b) A peak saturated power output greater than 5W (37 dBm) at operating frequency exceeding 8.5 GHz and 16 GHz or less
9.1.21.1.2.1
(ii) The 8th provision first number, the second number or the technology which is necessary for the design or production of those which correspond up to five either of the fifth number from the fourth number (those which correspond to the program and the preceding issue are excluded.)
9.1-21.1.2.1
(ii) The 8th provision first number, the second number or the technology which is necessary for the design or production of those which correspond up to five either of the fifth number from the fourth number (those which correspond to the program and the preceding issue are excluded.)
9.1.21.1.2.2
(ii) Technology (excluding programs) required for designing or manufacturing products that fall under any of Article 8 (9) to (12) (excluding those that fall under Article 11 (b))
9.1-21.1.2.2
(ii) Technology (excluding programs) required for designing or manufacturing products that fall under any of Article 8 (9) to (12) (excluding those that fall under Article 11 (b))
9.1.21.1.7.2
(vii)-2 A program designed or modified to design or manufacture a program that falls under Article 8 No. 11 (b) or Item 9-2 of this paragraph.
9.1-21.1.7.2
(vii)-2 A program designed or modified to design or manufacture a program that falls under Article 8 No. 11 (b) or Item 9-2 of this paragraph.
9.1.21.1.8.3
(viii)-3 A program designed or modified to use Article 8 No. 11 (b) or a program that falls under item 9-2 of this paragraph.
9.1-21.1.8.3
(viii)-3 A program designed or modified to use Article 8 No. 11 (b) or a program that falls under item 9-2 of this paragraph.
9.2.21.2.15
(xv) A program specially designed or modified for law enforcement monitoring or analysis that realizes the following functions (a) and (b) (paragraph 1, item 5, item 6, item 8). Excludes programs designed or modified exclusively for items that fall under any of items, item 2 of this item, or items c to g.)
9.2-21.2.15
(xv) A program specially designed or modified for law enforcement monitoring or analysis that realizes the following functions (a) and (b) (paragraph 1, item 5, item 6, item 8). Excludes programs designed or modified exclusively for items that fall under any of items, item 2 of this item, or items c to g.)
9.2.21.2.15.a
(a) Based on the hard selector for the communication content or metadata acquired from the communication service provider using the handover interface.
9.2-21.2.15.a
(a) Based on the hard selector for the communication content or metadata acquired from the communication service provider using the handover interface.
9.2.21.2.15.b
(b) Analysis of related human networks or tracking of targeted individual movements based on communication content or metadata or search of (a)
9.2-21.2.15.b
(b) Analysis of related human networks or tracking of targeted individual movements based on communication content or metadata or search of (a)
9.2.21.2.15.c
(c )Billing purpose
9.2-21.2.15.c
(c )Billing purpose
9.2.21.2.15.d
(d) Network quality of service (QoS)
9.2-21.2.15.d
(d) Network quality of service (QoS)
9.2.21.2.15.e
(e )User experience quality control (QoE)
9.2-21.2.15.e
(e )User experience quality control (QoE)
9.2.21.2.15.f
(f) Mediation device
9.2-21.2.15.f
(f) Mediation device
9.2.21.2.15.g
(g) Mobile settlement or banking
9.2-21.2.15.g
(g) Mobile settlement or banking
9.2.21.2.16
(xvi) Technology (excluding programs) required for designing, manufacturing or using the program of No. 15 (excluding those related to operation)
9.2-21.2.16
(xvi) Technology (excluding programs) required for designing, manufacturing or using the program of No. 15 (excluding those related to operation)
9.1.21.1.9.2
(ix)-2 Programs with functions equivalent to those of goods falling under Article 8, item (xi)(b), to realize the functions or to simulate the functions (excluding intrusion programs).
9.1-21.1.9.2
(ix)-2 Programs with functions equivalent to those of goods falling under Article 8, item (xi)(b), to realize the functions or to simulate the functions (excluding intrusion programs).

Related Content